Sale on Active Autowerke Intercoolers,Exhausts and lots more

[mike@x-ph.com]

Lowest Price Guarantee

We are having a sale on AA Intercoolers, Exhausts and Softwares

Check out all AA products on our website:
www.ExtremePowerHouse.com

pm me the link of a product you like and i will reply back within couple hours with the best deal you can find anywhere

We are authorized dealers for Active Autowerke. We work directly with them to make sure that you get the lowest prices on all their products


We guarantee you the lowest price and the best customer service

An hour after you make the purchase your order is processed.
Depending on your location we decide from which warehouse we should send you the products in order to save you money on shipping. After that we ship the products and send you a tracking number. All this is done in couple hours to make sure your order is shipped within the same day you make the purchase

We also ship internationally using USPS to guarantee you get the lowest shipping rate.

[mike@x-ph.com]

Retail Price is 499$, Price during the sale is 411$!!!!

Retail Price is 499$, Price during the sale is 411$!!!!

Retail Price is 499$, Price during the sale is 411$!!!!

Active Autowerke BMW 328i 128i Performance Tune Software
Through careful remapping to the DME Active Autowerke has increased the horsepower and torque by over 15 and 12 respectively for your BMW 328i 128i with the N51/N52 engine. Available for 91-93 octane we now allow you to maximize your car's true potential while maximizing your fuel consumption. Modifications to the a/f, ignition tables, VANOS, Vlavetronic systems, and wide open maps also allow for an overall improved driving experience. With your new increased RPM limit you will be able to enjoy more usable power. With other off road options such as software for BMW 328i 128i without cats, Active Autowerke allows you to maximize your car's modifications' true potential. This upgrade is a must for the enthusiast looking to maximize their naturally aspirated car's performance. Add the Active Autowerke Signature BMW 328i Exhaust for the best combination package!

Key Feautures:

-Works on both N51 and N52 engines
-Improved Gas Mileage
-Sportier throttle response
- Available for 91-93 octane
-Smoother pulls through RPM band
-Off Road options for cars without cats
-Increase RPM Limiter for Manual Cars
-15 HP gain & 12 ft lbs of torque.
-Expect Higher Gains with bolt on Modifications.
Software Purchase Options
When you purchase software you have 3 options to aquire it.
1) Locate an Active Autowerke Flash station equiped dealer near you and have it installed there. Click here for Dealer List.
2) Purchase a Simon Tool from Active Autowerke and install the software yourself. Very useful if additional software upgrades are needed in the future.
3)Remove and mail Active Autowerke your ECU and we will install the software. Same day turnaround on all software with free 2nd day air to lower 48 states. See Tech Support for details on removal and mailing of ECU.

[mike@x-ph.com]

pm sent

[mike@x-ph.com]

pm sent

[mike@x-ph.com]

Price is 79$!!!
Price is 79$!!!
Price is 79$!!!


Pm me for more discounts



If you are an N54 powered BMW 135i owner, then you already know how much fun two turbos mated to an inline 6 cylinder German engine can be.
You also know you're ready for more. One of the easiest way to add some extra horsepower and efficiency to your late model BMW is with a drop-in panel filter.
This piece improves many different aspects of the N54 135i's engine performance, at an affordable price. Place your order now!

[mike@x-ph.com]

pm sent

[mike@x-ph.com]

Retail Price is 595$


Pm me for your discount!!!!



BMW 135i 335i BOV Kit
Our single BMW 135i 335i BOV Kit sports a huge venturi, designed to handle excess pressure build-up against the turbo compressor impeller blades, pressure at the impeller to stop spinning (a.k.a. Compressor Surge),which can damage the compressor wheel and shaft. With our 135i 335i Performance BOV in place, the stock turbos are protected as the boost is raised – you can take HP to the stratosphere, enjoy the spoils of all that performance, and get that cool “whoosh” sound as your machine spits out excess inlet pressure.

All hardware & fittings have that quality factory look you demand, and are built to perform flawlessly under the most aggressive boost conditions. Combine with our effective BMW Software for the ultimate performance tandem


Key Features:

High-efficiency single displacement BOV – takes place of two smaller plastic valves
Large opening can handle maximum boost, provide high flow
Proven and tested to handle 600+ HP
All aluminum venturi design with factory-style throttle clamp
CNC machined flange
Durable black powder-coated wrinkle finish
Illustrated instruction manual & installation guide for easy “Plug ‘n Play”

[mike@x-ph.com]

pm sent

[mike@x-ph.com]

pm sent

[mike@x-ph.com]

Retail Price is 315$ pm me for the best deal

[mike@x-ph.com]

[mike@x-ph.com]

pm sent

[mike@x-ph.com]

pm sent

[mike@x-ph.com]

Retail Price is 699$ Our Price is 579$


BMW 135i Performance Downpipe
A turbo impeller wheel speed is mostly limited by the exhaust back pressure within the system. If one could eliminate some or most of this exhaust back pressure, the turbo will spool that much faster and effortlessly resulting in quicker engine revs and increase HP. The Active Autowerke Signature 135i downpipe is designed with the intent to maximize in power. The downpipes are created with the least amount of restrictions possible by utilizing a full 3" piping throughout with the least amount of bends possible, that is impressive when compared to the factory diameter of 2.50".
Active Autowerke Signature 135i Downpipe Benefits
What you will experience is a faster, more responsive engine because the turbo impeller now has the ability to spool that much faster. The end result is more power. For added durability, factory like support braces are also implemented to alleviate stresses upon the turbos. Made from 304 stainless throughout ensures a robust and durable exhaust that will provide trouble free performance with the longevity to match. All flanges are 304 stainless with the 0.060" wall thickness (~1.5 m.m.)

note: designed for off-road use, car will have CEL without Active Autowerke BMW Software Upgrade for Off-Road use

Key Features:

-Designed with less restrictive curves and more straight flows
-Full 3.00" diameter piping throughout allows for maximum power output
-Quicker turbo spool
-Durable construction from 304 stainless with 1.50mm wall thickness
-Precise fit installation
-Full down pipe exhaust support braces relieves load bearing stress
-Installation included with large pictures and short text

[mike@x-ph.com]

Pm me for the Lowest Price Guarantee

[mike@x-ph.com]

Pm me for the Lowest Price guarantee

[mike@x-ph.com]

Pm me for the Lowest price Guarantee!!!

BMW 135i Signature Exhaust

After months of testing this system with various size piping our engineering team decided that 3.5” piping is the best suited size for a true free flowing design on the BMW 135i exhaust. The increase in piping size decreases back pressure allowing the 135i’s twin turbo to spool even faster resulting in increased horsepower and torque throughout the entire RPM range. Our engineering team also incorporated the Active Autowerke Noise Cancellation Chamber to assist in reducing/eliminating drone in the BMW 135i exhaust. Manufactured from 100% polished 304 stainless steel this bolt on system is a must for the 135i owner looking to bring their BMW to new heights. Combined with our Siganture BMW 135i Downpipe, the horsepower gains are extreme.

Key Features:

-Full 304 stainless steel with hi-polish finish
-3.50" Mandrel Bent Piping for Optimum Exhaust Flow
-NCC (Drone Reduction)
-Dual 80mm Active Autowerke Signature tips mounted staggered
-Weight Savings -Designed to use existing factory mounts and hardware
-Full adjustable mounting positions
-True Bolt On System

[mike@x-ph.com]

Pm me for the Lowest Price guarantee!!!

[mike@x-ph.com]

Pm me for the Lowest Discount Guarantee!!!

[mike@x-ph.com]

Pm me for the Lowest Price guarantee!!!


Active Autowerke BMW 135i 335i Intercooler FMIC (Sport)
Looking to maintain the power on your BMW 135i and 335i?
Install the Active Autowerke BMW 135i 335i intercooler sport version for nearly factory-like fitment and experience the meaning of sustainable power in a compact package. The Active Autowerke BMW 135i 335i front mount intercooler is the best performing bolt-on performance intercooler that you can buy. Simply by bolting on this intercooler on a stock car, you can expect over 10 wheel horsepower gains due to the revised efficiency, or even more with additional performance modifications like our Active Autowerke BMW 135i Downpipe. This intercooler is created to handle more internal airflows than its stock counterpart, and will not heat soak as readily like the BMW factory unit.
BMW 135i 335i Intercooler Benefits And Design For Performance Designed from inception, thisBMW 135i 335i intercooler has the largest swept area that could possibly be fitted within the confines of the BMW factory bumper that it is housed inside. Simply put, this BMW intercooler will perform and deliver consistent, reliable power run after run without power robbing heat soak.
Some minor cutting is required. This Active Autowerke BMW intercooler features the industry standard of a bar and plate core design with seamless cast end tanks with 2.25" inlet and outlets for the least amount of air restrictions possible.
Proper placement of heavy duty mounting tabs ensure for a good fitment. Included in each intercooler kit is all the piping necessary with heavy duty silicone hoses and clamps all for a smooth, trouble free installation.
Designed specifically for the BMW E8X 135i and E9X 335i in 2 door and 4 door configurations, it also fits both, early models (07 - 08) and later models (09 -). Just specify your particular model and the kit will be built to include all the necessary hardware for your specific application at no additional cost to you. Minor trimming may be needed for proper fitment.

Large but compact, it delivers the performance reliably and consistently as intended with the added features to be reversible if the need arises.

Key Features:



Industry standard bar and plate core design for that rugged construction
Delivers substantially more internal airflow than the factory BMW unit
No heat soak measured on street application
Delivers an increase in performance consistenly
Cast end tanks with sturdy mounting bosses
Full aluminum piping with proper silicone hoses and clamps for a trouble free, simple install
Detailed CD instructions featuring mostly pictures with less text
Easy to install to the factory set-up with the benefits of reversibility if needed

Specifications:
Intercooler core dimensions 6.00" Tall, 20.00" Wide, 6.00" Thick
Capable for up to 550 WHP
Finished in BLACK for a stealth look

[mike@x-ph.com]

Pm me for the Lowest Price Guarantee!!!

[mike@x-ph.com]

Pm me for the Lowest Discount Guarantee!!!