F.S.: 19" SSR GT-10 e46 M3 fitment with tires...

[Irish Bimmer]

BIMMERPOST / Classifieds

Asking Price:

None

Item Interest

Well, it's come time for me to part with these wheels. I've had these wheels on my Z4M coupe for about a year and a half now. My cars lease is over in November, so I figured I'd go ahead and list these for sale now.

Wheels: SSR GT-10 multi piece forged wheels
Fronts: 8.5" x 19 ET 43
Rears: 10.0" x 19 ET 24

Tires: Fronts are General Exclaim's / Rear's are Kumho Ecsta SPT's
Fronts: 235/35-19 with about 30% tread life left
Rears: 275/30-19 with about 65% tread life left

I've had this setup on the car for about 17,000 miles and have loved it. The reason I have different tires on the front and back is because I had the General's all the way around, but we all know that the rears wear faster on our cars. Well, around the time I needed new tires, nobody was carrying the Generals in this size due to manufacturing defects.

I bought these wheels because I loved the way they looked, but also to protect my stock wheels from abuse - don't want to owe BMW anymore than I have to at lease turn in. With that being said, these wheels have been daily driven and have accumulated some flaws.

The passenger front has a slight bend in the lip, as well some curb rash. This bend is not significant enough to have diminished the ride, or the balancing of the wheel. The passenger rears lip has a spot where the clear coat has worn off. The other wheels are fine. I had originally planned to replace this car with an e90, and looked into getting these wheels reconditioned. I was quoted ~$250 to have the two passenger side lips reconditioned. With that being said, these wheels are still gorgeous, and I still receive comments regularly on them.

When I purchased these wheels, they were over $500 each for just the wheels. These wheels will look great on any car, and will fit an E46 M3, all current 3 series E90, E91, E92, and obviously the Z4M.

I haven't been on the forums for months now, so I'm not sure what these should go for. Any reasonable offer will be considered, but please don't lowball me.

If there is anything that I haven't covered, please feel free to ask me questions.

Thank you,
Kyle






Here is a close-up picture of the blemish that's on the passenger rear wheel...

[Irish Bimmer]

Bump...

[Irish Bimmer]

Due to people's requests, here are some pictures of each wheel by itself...

Passenger front - I tried to capture the bend and curb rash as best as I could:




Passenger rear:


Driver's side front:


Driver's side rear:


If anyone has any more questions feel free to ask.

Thank you,
Kyle

[Irish Bimmer]

Bump...