|
|
|
|
Post Reply |
|
Thread Tools | Search this Thread |
09-20-2019, 01:02 PM | #1 |
Major General
965
Rep 5,032
Posts |
E9X M3 Rogue Engineering Monoball installed in OEM Thrust Arms
This and KW Clubsports were my two favorite mods I did to my E92 M3. I was keeping these Monoballs to install on my F82, but Ben at Rogue just told me that these would need modification to work, so I am going to bite the bullet and buy a new set from Rogue. By getting these from me you can do this job at home in 1-2 hours depending on your level of proficiency. The thrust arms on E92 M3 are very easy to access and remove/install. No need for a press considering they are already pressed into the arm that I am providing. I put these on shortly after purchasing my car, and I only drove my car about 12k miles, so that means they have <12k miles. Rogue price $389 and I believe thrust arms from FCP Euro are about $150 each, so in my estimation this is a helluva deal. $300 picked up in the NorCal Bay Area |
09-20-2019, 01:44 PM | #3 |
Major General
965
Rep 5,032
Posts |
Previous owner of my car did a suspension refresh when installing coil overs, and that included thrust arms. Sadly I deleted all invoices I had saved for that vehicle after it sold. If I had to try to remember when that happened, I would say that the arms themselves have 20k miles. The arms are free of damage, and the ball joints are cherry.
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|