M4 LCI Tail Lights Coding Help

[Temper Tantrum]

Hi all -

I have done a search but been unable to find an actual walk through guide for eSys that would explain how I actually add 'HELC' to the WO. I have got eSys set up on the laptop and watched a few vids on various coding bits but not 100% sure how you 'add' this in?

Have only used Bimmercode before for stuff, but seems to be a bit of confusion over what values to use on the F82 if I were to try with that via expert mode.

Appreciate any help!

[tom @ eas]

Originally Posted by Temper Tantrum

Hi all -

I have done a search but been unable to find an actual walk through guide for eSys that would explain how I actually add 'HELC' to the WO. I have got eSys set up on the laptop and watched a few vids on various coding bits but not 100% sure how you 'add' this in?

Have only used Bimmercode before for stuff, but seems to be a bit of confusion over what values to use on the F82 if I were to try with that via expert mode.

Appreciate any help!

No values needed, it's VO coded in eSys. Adding in HELC will modify all the necessary values on its own on F82/3.

https://f80.bimmerpost.com/forums/sh...24&postcount=4