Unlocking ALL doors via bimmercode

M3ILANA · 11-19-2018, 06:42 AM

i've enabled this function in bimmercode inside Front Electronic Module, but when I shut off ignition only the driver's door unlocks. Is there a way to unlock ALL doors when turning off the ignition via bimmercode app?

RoundelM3 · 11-19-2018, 08:25 AM

Yes - you have to set the "unlock all doors" function in iDrive under Settings/Locking. If you have it set to only open the driver's door, that's all that the automatic unlock will do.

M3ILANA · 11-19-2018, 10:08 AM

Quote:

Originally Posted by RoundelM3

Yes - you have to set the "unlock all doors" function in iDrive under Settings/Locking. If you have it set to only open the driver's door, that's all that the automatic unlock will do.

thank you so much. bmw and its doors..

RoundelM3 · 11-19-2018, 11:52 AM

You're welcome. It is a bit confusing sometimes.

M3ILANA · 11-19-2018, 12:17 PM

Quote:

Originally Posted by RoundelM3

You're welcome. It is a bit confusing sometimes.

BMW - keeping rich folks safely locked in bad neighborhoods since 1916

RoundelM3 · 11-20-2018, 07:36 AM

Hah. But you can always get out by pulling the door handle twice.

HMM · 01-30-2019, 08:27 AM

Thank you! Been wondering the same thing... Going to go out and change this setting right now!

My daughter and her friends struggle with the double pull. And since getting coded and tuned last week I've had to hit the unlock button twice because the first time it locks my door back before it will unlock the rest of the doors. I thought I was going to go nuts...lol

HMM · 01-30-2019, 03:27 PM

Well that fixed it! Believe it or not that was one of the main reasons I wanted coded. That and to turn the rev match off...

Should have checked here before spending 30 bucks on bimmercode app...lol But at least now I have the app to play around with and learn. App actually seems pretty cool, lots of options!

11-19-2018, 06:42 AM	#1
M3ILANA Private 44 Rep 76 Posts Drives: BMW E36 Join Date: Nov 2017 Location: Vero Beach iTrader: (0)	Unlocking ALL doors via bimmercode i've enabled this function in bimmercode inside Front Electronic Module, but when I shut off ignition only the driver's door unlocks. Is there a way to unlock ALL doors when turning off the ignition via bimmercode app?
	Appreciate 0 Tweet Quote

11-19-2018, 08:25 AM	#2
RoundelM3 Major General 1837 Rep 6,990 Posts Drives: 15 F80 M3, 22 G01 X3 30i Join Date: Apr 2010 Location: Clayton, NC iTrader: (2) Garage List 2022 BMW X3 [9.83] 2015 BMW M3 [6.50]	Yes - you have to set the "unlock all doors" function in iDrive under Settings/Locking. If you have it set to only open the driver's door, that's all that the automatic unlock will do. __________________ 2015 F80 ///M3 Sedan 7DCT Tanzanite, 2022 X3 sDrive30i 8AT Brooklyn Grey
	Appreciate 0 Quote

11-19-2018, 11:52 AM	#4
RoundelM3 Major General 1837 Rep 6,990 Posts Drives: 15 F80 M3, 22 G01 X3 30i Join Date: Apr 2010 Location: Clayton, NC iTrader: (2) Garage List 2022 BMW X3 [9.83] 2015 BMW M3 [6.50]	You're welcome. It is a bit confusing sometimes. __________________ 2015 F80 ///M3 Sedan 7DCT Tanzanite, 2022 X3 sDrive30i 8AT Brooklyn Grey
	Appreciate 0 Quote

11-20-2018, 07:36 AM	#6
RoundelM3 Major General 1837 Rep 6,990 Posts Drives: 15 F80 M3, 22 G01 X3 30i Join Date: Apr 2010 Location: Clayton, NC iTrader: (2) Garage List 2022 BMW X3 [9.83] 2015 BMW M3 [6.50]	Hah. But you can always get out by pulling the door handle twice. __________________ 2015 F80 ///M3 Sedan 7DCT Tanzanite, 2022 X3 sDrive30i 8AT Brooklyn Grey
	Appreciate 0 Quote

01-30-2019, 08:27 AM	#7
HMM Private 36 Rep 91 Posts Drives: 2018 M3 Join Date: Jun 2018 Location: TN iTrader: (0)	Thank you! Been wondering the same thing... Going to go out and change this setting right now! My daughter and her friends struggle with the double pull. And since getting coded and tuned last week I've had to hit the unlock button twice because the first time it locks my door back before it will unlock the rest of the doors. I thought I was going to go nuts...lol
	Appreciate 0 Quote

01-30-2019, 03:27 PM	#8
HMM Private 36 Rep 91 Posts Drives: 2018 M3 Join Date: Jun 2018 Location: TN iTrader: (0)	Well that fixed it! Believe it or not that was one of the main reasons I wanted coded. That and to turn the rev match off... Should have checked here before spending 30 bucks on bimmercode app...lol But at least now I have the app to play around with and learn. App actually seems pretty cool, lots of options!
	Appreciate 0 Quote