Eisenmann Exhaust with custom AA mid pipe for sale

[PayamFSU]

BIMMERPOST / Classifieds

Asking Price:

Sold

Location:

✓ Will Ship

Item Interest

UPDATE : full exhaust is now off the car, will sell entire set up eisenman rear + AA midpipe for 2700 local pick up or 2850 shipped plus PayPal fees.

Hey all IÂ'm looking to change my exhaust again, unfortunately have a baby OTW and his/her room will be by the garage. Currently my setup cold start will be too loud. I currently have the Eisenmann exhaust custom modified to fit the AA mid pipe. I paid a shop to custom weld the pieces 250.00 and made sure that the tips DO NOT stick out too far as many exhaust do with the AA mid pipe. This exhaust set up has been my favorite so far, it is very very exotic and the perfect pitch for this engine. In the pics the far right tip has a slight dent that should be easily fixed with a pipe expander, I just didnÂ't care enough to do it, it came that way when I purchased the exhaust.

also parting out a lot of exterior carbon fiber parts!!! --->> http://f80.bimmerpost.com/forums/sho....php?t=1501046

[IMG]http://i784.photobucket.com/albums/y...ps2ciixbpt.jpg[/IMG]

[IMG]http://i784.photobucket.com/albums/y...psmhr6acro.jpg[/IMG]

[IMG]http://i784.photobucket.com/albums/y...ps3jbhtfdp.jpg[/IMG]

[IMG]http://i784.photobucket.com/albums/y...psu1jokquj.jpg[/IMG]

[IMG]http://i784.photobucket.com/albums/y...psdmha0ssn.jpg[/IMG]

[PayamFSU]

Weekend bump!

[PayamFSU]

b

[PayamFSU]

Bump!

[GlazierGlaze]

Is the AA welded on? Mind shooting me some information on what you did, I'm in the market for AA midpipes but I have the Eisenmann rear section and don't want to cut or weld anything.

[PayamFSU]

Originally Posted by GlazierGlaze

Is the AA welded on? Mind shooting me some information on what you did, I'm in the market for AA midpipes but I have the Eisenmann rear section and don't want to cut or weld anything.

No way around it you have to cut the AA rear and weld to eisnman totally worth it tho sounds great! Especially in the mid range sounds exotic , perfict pitch and performance plus the tips and the tucked in muffler look amazing. Really don't want to get rid of it, happy wife happy life ......

[GlazierGlaze]

Originally Posted by PayamFSU

No way around it you have to cut the AA rear and weld to eisnman totally worth it tho sounds great! Especially in the mid range sounds exotic , perfict pitch and performance plus the tips and the tucked in muffler look amazing. Really don't want to get rid of it, happy wife happy life ......

So there's no cutting of the Eisenmann section right? I think there's more value in having a complete non-fabricated Eisenmann section than an AA mid.

Any chance you'd sell the AA mid?

[PayamFSU]

Originally Posted by GlazierGlaze

So there's no cutting of the Eisenmann section right? I think there's more value in having a complete non-fabricated Eisenmann section than an AA mid.

Any chance you'd sell the AA mid?

You mean the entire set up? I would but only for 2700 plus stock exhaust

[PayamFSU]

Bump

[PayamFSU]

Weekend bump

[PayamFSU]

New vid enjoy

[PayamFSU]

Bump this thing sounds great nothing but compliments at the track even from V8 guys

[Luc@Speed&Tech]

Bump for OP. I had this exact same set up and can vouch that it sounds amazing.

[NikB316]

Originally Posted by PayamFSU

Bump this thing sounds great nothing but compliments at the track even from V8 guys

Sorry my knowledge on exhausts isn’t very good. If I wanted to retain my stock exhaust so I can put it on the car when I want to get it back to stock, you would need $1900 + an AA midpipe from me or am I mistaken? If I don’t have an AA mid pipe I’m assuming you would want $1900 + cost for AA mid pipe, correct? Is that an option as well? I am located in South Florida but could possibly drive up.

It sounds amazing! None of that raspy crap.

[PayamFSU]

Originally Posted by NikB316

Sorry my knowledge on exhausts isnÂ’t very good. If I wanted to retain my stock exhaust so I can put it on the car when I want to get it back to stock, you would need $1900 + an AA midpipe from me or am I mistaken? If I donÂ’t have an AA mid pipe IÂ’m assuming you would want $1900 + cost for AA mid pipe, correct? Is that an option as well? I am located in South Florida but could possibly drive up.

It sounds amazing! None of that raspy crap.

If you have a AA midpipe I just need the two back pieces that connect to the rear portion of the exhaust because those are the ones I have modified to fit the eisenman. If you are serious about the purchase I would recommend you have the AA midpipe installed in Miami then drive up to have me put on the eisenman for you. Let me know. I get compliments at the track all the time.

[PayamFSU]

Bump!

[Rsllk]

Are you willing to ship

[PayamFSU]

Originally Posted by Rsllk

Are you willing to ship

Where are u located and do you have an AA midpipe?

[Rsllk]

Originally Posted by PayamFSU

Where are u located and do you have an AA midpipe?

Sorry no

[PayamFSU]

still available, surprised no one is jumping on this.

[PayamFSU]

Bump ! Shocked no one is jumping on this.

[PayamFSU]

Sunday bump