Sponsored by The Tire Rack

[Maxevaaans]

Anyone lowered on oem wheels had any problems with rubbing?

[brocklanders]

Depends on how low, I have swift spec r, and 1/2" spacers on stock 18"s. I had no rubbing with stock tires but got very minor rubbing in the rear when I changed to 225/40 front and 235/40 rear Dunlop zII's, I removed the spacers and all is good.

[Maxevaaans]

Originally Posted by brocklanders

Depends on how low, I have swift spec r, and 1/2" spacers on stock 18"s. I had no rubbing with stock tires but got very minor rubbing in the rear when I changed to 225/40 front and 235/40 rear Dunlop zII's, I removed the spacers and all is good.

I have got some 18" 313 alloys and im not sure if they are too wide.

[VMRWheels]

What are the specs on the wheels?

[Chandon]

Originally Posted by Maxevaaans

I have got some 18" 313 alloys and im not sure if they are too wide.

Almost impossible to rub without spacers.. The sizes and offsets on 18" 313's are very conservative. 18x7.5 +49 front and rear 18x8.5 +52, even lowered on stock size tyres with 10mm spacers you would be fine.

[Maxevaaans]

Originally Posted by viciousgook

Almost impossible to rub without spacers.. The sizes and offsets on 18" 313's are very conservative. 18x7.5 +49 front and rear 18x8.5 +52, even lowered on stock size tyres with 10mm spacers you would be fine.

Thats brilliant thank you very much for your help!

Think I will take to lowering on the 313 alloys then dont suppose anyones got any pictures lowered on the 313's.