|
|
09-13-2014, 01:26 AM | #1 |
New Member
0
Rep 18
Posts |
Macht Shnell stage2 intake issue
Hi.I am having issues with installation of ms stage2 intake.I have watched the video several times on youtube.When I put the filter and filter attachment in, it does not line up with the elbow attachment.The filter does not even make contact with the spring in the airbox!
If I forcibly line the elbow attachment with the filter attachment and filter,the airbox cannot be closed because the filter inside is misaligned. I was told that there are two types of airbox for the e92 m3.The supplier denies this information. Is there 2 types of airboxes for this car? Someone please help |
09-13-2014, 06:54 AM | #3 |
Lieutenant General
5234
Rep 10,616
Posts |
Obviously make sure the filter is oriented correctly. Early models require and adapter but you can make one. Essentially the spring loaded nub in the fender side of the box that presses into the dimple on the top of the filter is too strong. Pull the box, pull the spring and push it back in by about 1/2 inch.
|
Appreciate
0
|
09-13-2014, 10:43 AM | #6 |
Güdentyte
1157
Rep 1,196
Posts |
Take photos and post back. Easier to visualize where the trouble is.
__________________
CURRENT - 991 GT3 | Future Classic 1M | Model 3 | T4R TRD Pro Lime Rush
SOLD - MB M2 CS | SMB F80 M3 CS | E90 M3 | E90 335i | E46 M3 Vert | E39 M5 | E34 525i |
Appreciate
0
|
09-13-2014, 03:00 PM | #8 |
Brigadier General
792
Rep 3,151
Posts |
Yeah take some pic and post.
__________________
Current Mods:
2004 E46 M3cs JB/CSL 2010 E70 X5M AW/BLACK 2011 VW Golf R DSG White/Black IG: @060Motorsports |
Appreciate
0
|
10-13-2014, 09:38 PM | #9 |
Mr. Nice Says Hello
636
Rep 16,662
Posts
Drives: BMW M3 | X5 xdrive 35i MSport
Join Date: Dec 2008
Location: USA
|
all you have to do is remove the spring. That is what I did on my 2008 m3. Once you remove it you can install it and should all line up
Watch the video, it shows you how to remove the spring |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|