can anyone install...

E92_335 · 08-14-2007, 01:55 AM

...H&R sport springs? I need someone who is close to LA and has done it before. (Will fix it if anything goes wrong in the future)

If you know of any shops that are good (besides F1) and have good prices, then you can list those too.

I PM'ed ///Matt but he is too busy, then I PM'ed CEA 3 and he has not responded so I supposed he can't do it.

Thanks

wj4 · 08-14-2007, 01:58 AM

Try LongTran. PS Should've post this in the Cali regional section.

billspreston · 08-14-2007, 02:35 AM

Quote:

Originally Posted by E92_335

...H&R sport springs? I need someone who is close to LA and has done it before. (Will fix it if anything goes wrong in the future)

If you know of any shops that are good (besides F1) and have good prices, then you can list those too.

I PM'ed ///Matt but he is too busy, then I PM'ed CEA 3 and he has not responded so I supposed he can't do it.

Thanks

I'm in the exact same situation right now... steps 2nd in line =)

Mrbojangles · 08-14-2007, 03:18 AM

Gintani did my car

CASHBY · 08-14-2007, 01:51 PM

hey sorry I have been busy... I can do it but not til later this week.

PM me and let me know if that is ok... thanks man!

CASHBY · 08-14-2007, 01:52 PM

oh yes... i will give you the 100% on my install... meaning if anything goes wrong later down the line from installation then i will fix it... but really its hard for anything to go wrong if done right the first time.

edzilla · 08-16-2007, 08:05 PM

You might want to check out SP Engineering. They've done a few 335's already and I was told they're doing their own R&D for downpipes/bov kits/exhaust/etc.... for the 335i. They have a blue project car that they are working on right now...

But yeah I've seen a few of the cars they have lowered, no issues at all.

Give them a call, 626-333-5398.

Ed

OhhaiAlex · 08-20-2007, 02:14 AM

too bad ur in LA. My BF does installs on any cars.

He just finish putting coils on a 328 like 2 weeks ago

Tonester · 10-04-2007, 01:54 PM

Quote:

Originally Posted by edzilla

You might want to check out SP Engineering. They've done a few 335's already and I was told they're doing their own R&D for downpipes/bov kits/exhaust/etc.... for the 335i. They have a blue project car that they are working on right now...

But yeah I've seen a few of the cars they have lowered, no issues at all.

Give them a call, 626-333-5398.

Ed

I trust SP Engineering, Certified BMW techs there.

Joonsup · 10-04-2007, 02:11 PM

Quote:

Originally Posted by WhiteAngel

too bad ur in LA. My BF does installs on any cars.

He just finish putting coils on a 328 like 2 weeks ago

Does he do a good job? I'm going to assume you're going to give me a biased answer. haha. I might want to lower mine once the car comes in and I'm in SJ too. I'll keep that in mind for sure.

Ray · 10-04-2007, 02:19 PM

Quote:

Originally Posted by joonsup

Does he do a good job? I'm going to assume you're going to give me a biased answer. haha. I might want to lower mine once the car comes in and I'm in SJ too. I'll keep that in mind for sure.

I doubt she'll say no. Anyone with experience should be able to handle the job.

Joonsup · 10-04-2007, 04:07 PM

Quote:

Originally Posted by Ray

I doubt she'll say no. Anyone with experience should be able to handle the job.

or i can take it to MachIII where I got my accord lowered 10 years ago for $220 with springs. haha

E92_335 · 10-13-2007, 04:43 PM

they probably cut the spring hahaha

08-14-2007, 01:55 AM	#1
E92_335 Colonel 156 Rep 2,863 Posts Drives: G20 330i Join Date: Jun 2007 Location: CA iTrader: (7)	can anyone install... ...H&R sport springs? I need someone who is close to LA and has done it before. (Will fix it if anything goes wrong in the future) If you know of any shops that are good (besides F1) and have good prices, then you can list those too. I PM'ed ///Matt but he is too busy, then I PM'ed CEA 3 and he has not responded so I supposed he can't do it. Thanks __________________
	Appreciate 0 Tweet Quote

08-14-2007, 01:58 AM	#2
wj4 Major General 339 Rep 7,719 Posts Drives: E90 manual 335i Join Date: Nov 2006 Location: Burbank, CA iTrader: (8)	Try LongTran. PS Should've post this in the Cali regional section.
	Appreciate 0 Quote

08-14-2007, 03:18 AM	#4
Mrbojangles Lieutenant 41 Rep 560 Posts Drives: BMW M3- Melbourne RED- Join Date: Feb 2007 Location: LA... The Valley iTrader: (0)	Gintani did my car
	Appreciate 0 Quote

08-14-2007, 01:51 PM	#5
CASHBY 168 Rep 2,114 Posts Drives: E90 335 "done up" Join Date: Dec 2006 Location: GARAGE iTrader: (2)	hey sorry I have been busy... I can do it but not til later this week. PM me and let me know if that is ok... thanks man!
	Appreciate 0 Quote

08-14-2007, 01:52 PM	#6
CASHBY 168 Rep 2,114 Posts Drives: E90 335 "done up" Join Date: Dec 2006 Location: GARAGE iTrader: (2)	oh yes... i will give you the 100% on my install... meaning if anything goes wrong later down the line from installation then i will fix it... but really its hard for anything to go wrong if done right the first time.
	Appreciate 0 Quote

08-16-2007, 08:05 PM	#7
edzilla Lieutenant 35 Rep 400 Posts Drives: 03 M3 Join Date: Jul 2007 Location: Southern California iTrader: (6)	You might want to check out SP Engineering. They've done a few 335's already and I was told they're doing their own R&D for downpipes/bov kits/exhaust/etc.... for the 335i. They have a blue project car that they are working on right now... But yeah I've seen a few of the cars they have lowered, no issues at all. Give them a call, 626-333-5398. Ed
	Appreciate 0 Quote

08-20-2007, 02:14 AM	#8
OhhaiAlex Oh hai :) 50 Rep 3,880 Posts Drives: M3 Join Date: Mar 2007 Location: Santa Clara iTrader: (0)	too bad ur in LA. My BF does installs on any cars. He just finish putting coils on a 328 like 2 weeks ago __________________
	Appreciate 0 Quote

10-13-2007, 04:43 PM	#13
E92_335 Colonel 156 Rep 2,863 Posts Drives: G20 330i Join Date: Jun 2007 Location: CA iTrader: (7)	they probably cut the spring hahaha __________________
	Appreciate 0 Quote