|
|
SUPPORT ZPOST BY DOING YOUR TIRERACK SHOPPING FROM THIS BANNER, THANKS! |
Post Reply |
|
Thread Tools | Search this Thread |
05-12-2010, 10:30 AM | #1 |
Private First Class
4
Rep 108
Posts |
Anyone got a design for a Ram Air Scoop?
After looking at a few ram air scoop's on the open market I tried my hand at making my own. Result was a LOT of cut up cardboard !! Never did get it to a point i was happy with.
Anyone out their care to share a design? BTW using a bit of redneck improvisation I did successfully make a scoop from a 90degree 2"diameter black PVC pipe. Attached with two zipties. Last edited by Trev; 02-23-2013 at 12:33 AM.. |
05-12-2010, 11:02 AM | #2 |
Private First Class
14
Rep 100
Posts |
i did the same thing... out of a pizza box lol basicly an RPI scoop. used pizza box... wrapped in aluminum tape and sprayed black with caliper paint.... it has seen many heavy rains... a blizzard... and near flooding and its still attached and still dry
__________________
|
Appreciate
0
|
Post Reply |
Bookmarks |
Thread Tools | Search this Thread |
|
|