▀▄ eas - Rogue Engineering

tom @ eas · 05-29-2009, 09:47 PM

Rogue Engineering proud to introduce its E9X M3 adjustable rear toe arms. These arms allow for greater toe adjustment for vehicles that have lowered on coilover suspension. For E9X M3 owners with just lowering springs, these are not a necessary requirement.

How Low Can You Go?
When an E9X M3 is lowered beyond the limits of just lowering springs, the rear wheels toe-in excessively. This excessive rear toe can cause increased tire wear (faster than more camber). Here are the specifications for the E9X M3.

Factory Toe Specs
Min: +0.10
Max: +0.20
Preferred: +0.15

On a recent install of coilovers, RE discovered that the toe of the rear wheels had an incurable +0.81 left and right toe. Unfortunately, with the stock toe arms, we could not dial out the toe. Therefore, creating a strong, more adjustable part was in order.

The Right to Bear (Stronger) Arms
The sophisticated (and some say complicated) rear suspension of the current E9X M3s will undoubtedly be replicated by many other companies in the future. However, for those of us in the aftermarket, we're still learning about the little quirks of the suspension. By applying our experience with our E36 and E46 suspension components, we have built arms that are strong and lightweight, while serving the needs of the rear suspension adjustments.

RE's rear control arms are made from the highest quality components, manufactured in the USA.

- 100% machined and anodized, 6061-T6 lightweight aluminum arms
- High-strength, 3 piece, rod end (with carbon fiber reinforced, PTFE race) offers longer live for street use over standard rod ends
- Seals-it Rod End Seals keep dirt, water and other contaminants out (Rogue Engineering is the ONLY company to incorporate this simple, yet effective item to extend the life of the rod end!)
- Lighter than stock! (Stock is 875g, RE arms are 640g)
- Extremely easy installation and adjustment (your alignment shop will love you!)

Rogue Engineering - Rear Toe Arms for e9x M3
http://www.europeanautosource.com/pr...oducts_id=2339

Questions are welcomed, otherwise - have a great weekend.

MrHarris · 05-30-2009, 06:20 AM

Wow, sounds like a must have when I purchase a set of KWv3's.

GT3 Tim · 05-31-2009, 04:44 PM

You guys rock!

RE is such a quality company with quality parts....what else can I say!

I have been a fan since when Ben et al. created UUC.

Keep up the good work guys!

powertrip · 05-31-2009, 07:28 PM

Hey Tom,

I noticed that Rogue's website says the M3 DCT pulley is now available. Shoot me a PM when you have your first one and I'll be there with cash in hand

.

tom @ eas · 06-01-2009, 11:57 AM

Quote:

Originally Posted by powertrip

Hey Tom,

I noticed that Rogue's website says the M3 DCT pulley is now available. Shoot me a PM when you have your first one and I'll be there with cash in hand

.

New pulleys are already on the way. Shoot me a PM and I'll allocate a set for you when they arrive.

sparkyg · 06-01-2009, 12:14 PM

Any news on the Shifters?

tom @ eas · 06-01-2009, 12:18 PM

Quote:

Originally Posted by sparkyg

Any news on the Shifters?

Shifters are en route will be here in a couple of days.

We have a few preorders already on those, get your order in if you would like me to allocate one for you.

brandon @ eas · 06-22-2009, 12:48 PM

In stock

brandon @ eas · 06-26-2009, 07:11 PM

in stock ready to ship

david @ eas · 07-09-2009, 12:08 PM

All PM's have been replied to!

david @ eas · 12-17-2009, 12:26 PM

All Pm's have been replied to! If you have any other questions, please feel free to ask

05-29-2009, 09:47 PM	#1
tom @ eas BimmerPost Supporting Vendor 8108 Rep 18,799 Posts Drives: BMW Join Date: Nov 2005 Location: Anaheim, CA iTrader: (19) Garage List 2018 BMW i3s [0.00] 2010 BMW M3 [6.50] 2015 BMW M4 [5.25]	▀▄ eas - Rogue Engineering - Adjustable Rear Toe Arms for e9x M3 Rogue Engineering proud to introduce its E9X M3 adjustable rear toe arms. These arms allow for greater toe adjustment for vehicles that have lowered on coilover suspension. For E9X M3 owners with just lowering springs, these are not a necessary requirement. How Low Can You Go? When an E9X M3 is lowered beyond the limits of just lowering springs, the rear wheels toe-in excessively. This excessive rear toe can cause increased tire wear (faster than more camber). Here are the specifications for the E9X M3. Factory Toe Specs Min: +0.10 Max: +0.20 Preferred: +0.15 On a recent install of coilovers, RE discovered that the toe of the rear wheels had an incurable +0.81 left and right toe. Unfortunately, with the stock toe arms, we could not dial out the toe. Therefore, creating a strong, more adjustable part was in order. The Right to Bear (Stronger) Arms The sophisticated (and some say complicated) rear suspension of the current E9X M3s will undoubtedly be replicated by many other companies in the future. However, for those of us in the aftermarket, we're still learning about the little quirks of the suspension. By applying our experience with our E36 and E46 suspension components, we have built arms that are strong and lightweight, while serving the needs of the rear suspension adjustments. RE's rear control arms are made from the highest quality components, manufactured in the USA. - 100% machined and anodized, 6061-T6 lightweight aluminum arms - High-strength, 3 piece, rod end (with carbon fiber reinforced, PTFE race) offers longer live for street use over standard rod ends - Seals-it Rod End Seals keep dirt, water and other contaminants out (Rogue Engineering is the ONLY company to incorporate this simple, yet effective item to extend the life of the rod end!) - Lighter than stock! (Stock is 875g, RE arms are 640g) - Extremely easy installation and adjustment (your alignment shop will love you!) Rogue Engineering - Rear Toe Arms for e9x M3 http://www.europeanautosource.com/pr...oducts_id=2339 Questions are welcomed, otherwise - have a great weekend. __________________ Tom G. \| european auto source (eas) email: tom@europeanautosource.com · web: https://europeanautosource.com· tel 866.669.0705 · ca: 714.369.8524 x22 GET DAILY UPDATES ON OUR BLOG · FACEBOOK · YOUTUBE · FLICKR · INSTAGRAM
	Appreciate 0 Tweet Quote

05-30-2009, 06:20 AM	#2
MrHarris yodog 197 Rep 5,026 Posts Drives: '86 Corolla Join Date: Jun 2007 Location: Diamond Bar, Ca iTrader: (5) Garage List 2009 BMW [10.00]	Wow, sounds like a must have when I purchase a set of KWv3's. __________________ 2009 E92 M3 \| Alpine White \| Black Extended \| Advan RS \| Turner Test Pipes \| Dinan Axle-Back \| OETuning \| Eibach Springs \| UUC SSK \| VRS Front Lip \| VRS Type I Diffuser \| Matte Black \| RPi Scoops \| MS Filter \| Yokohama AD08 \| F1 Pinnacle Special Thanks: Gintani \| OETuning \| eAs
	Appreciate 0 Quote

05-31-2009, 04:44 PM	#3
GT3 Tim Moderator 94 Rep 1,920 Posts Drives: 2014 MB E63S Join Date: Feb 2008 Location: Sacramento, CA iTrader: (0)	You guys rock! RE is such a quality company with quality parts....what else can I say! I have been a fan since when Ben et al. created UUC. Keep up the good work guys! __________________ Tim <--- apparently likes "3" cars 2014 E63S -- The Rocket 2014 F30 328i -- Kids car 2008 E90 M3 -- Sold 2004 GT3 -- Sold 1997 M3/4 -- Sold 1995 M3 -- Sold
	Appreciate 0 Quote

05-31-2009, 07:28 PM	#4
powertrip Scared money don't make money. 67 Rep 1,449 Posts Drives: 2009 E92 M3 DCT Join Date: Apr 2009 Location: Irvine, CA iTrader: (3) Garage List 2009 E92 M3 [0.00]	Hey Tom, I noticed that Rogue's website says the M3 DCT pulley is now available. Shoot me a PM when you have your first one and I'll be there with cash in hand . __________________ 2009 E92 M3/DCT/Alpine White/Fox Red/Carbon Leather OE Tuned 402 whp & 303 wtq/Gintani X-pipe/MXP Axle Back/Rogue Pulley/AFE Stage 2/Cosmetics By IND & EAS HUGE THANKS: Gintani, OE Tuning, and EAS
	Appreciate 0 Quote

06-01-2009, 12:14 PM	#6
sparkyg Brigadier General 142 Rep 3,522 Posts Drives: work truck Join Date: Sep 2007 Location: Oil Country iTrader: (5)	Any news on the Shifters?
	Appreciate 0 Quote

06-22-2009, 12:48 PM	#8
brandon @ eas BimmerPost Supporting Vendor 516 Rep 3,613 Posts Drives: F30 335i Join Date: Aug 2007 Location: Anaheim, CA iTrader: (10)	In stock
	Appreciate 0 Quote

06-26-2009, 07:11 PM	#9
brandon @ eas BimmerPost Supporting Vendor 516 Rep 3,613 Posts Drives: F30 335i Join Date: Aug 2007 Location: Anaheim, CA iTrader: (10)	in stock ready to ship
	Appreciate 0 Quote

07-09-2009, 12:08 PM	#10
david @ eas BimmerPost Supporting Vendor 254 Rep 4,048 Posts Drives: BMW Join Date: Mar 2008 Location: Anaheim iTrader: (5)	All PM's have been replied to!
	Appreciate 0 Quote

12-17-2009, 12:26 PM	#11
david @ eas BimmerPost Supporting Vendor 254 Rep 4,048 Posts Drives: BMW Join Date: Mar 2008 Location: Anaheim iTrader: (5)	All Pm's have been replied to! If you have any other questions, please feel free to ask
	Appreciate 0 Quote