BMW M3 Forum (E90 E92)

BMW Garage BMW Meets Register Search Today's Posts Mark Forums Read


Go Back   M3Post - BMW M3 Forum > E90/E92 M3 Technical Topics > Mechanical Maintenance: Break-in / Oil & Fluids / Servicing
 
View Poll Results: How tightly do you stick to the break-in period?
Religiously, no revving over 5500 rpm nor overspeeding what so ever. 101 53.16%
As close to the manual as possible, but can't resist the open road or 911 speeding pass. 67 35.26%
Screw it, it's my car and no 1 tells me how to drive it. 22 11.58%
Voters: 190. You may not vote on this poll

Post Reply
 
Thread Tools Search this Thread
      08-13-2008, 01:10 AM   #1
synclastica_86
Captain
synclastica_86's Avatar
Hong Kong
240
Rep
735
Posts

Drives: F32 435i, E92 M3, S550
Join Date: Aug 2008
Location: Hong Kong

iTrader: (0)

Garage List
The Break-in Religion...

As stated clearly in the manual, the break-in period is for the first 1200-3000 miles. But which of you actually know what it's for? How is this suppose to make the drivetrain and enging better or worse? Does it affect your warrenty? And most importantly who actually follows it religiously?
__________________

Current: BMW F32 435iA M-Sports; BMW E92 M3, M-DCT; Mercedes W221 S550 4matic; Ford Fiesta ST; Nissan Silvia S15 Spec-R
Retired: BMW E93 323iA; BMW E85 Z4 3.0i, SMG; Lexus IS 250 AWD; Lexus GX 470; Mercedes W203 C230 Sportscoupe; Peugeot 206 S16; Peugeot 206 RC
Appreciate 0
      08-13-2008, 01:22 AM   #2
Davinhci
Colonel
Davinhci's Avatar
United_States
55
Rep
2,484
Posts

Drives: 08 M3 E92 & 08 E70 X5 4.8
Join Date: Mar 2008
Location: Austin, TX

iTrader: (6)

Garage List
2008 M3  [0.00]
you sure do love polls!
__________________

08 E92 AW M3 | HRE P40 19" | APE Air Filter | BMW Performance Grills | White Side Gills | CF Mirror Covers | BMW Performance Pedals | F1 Pinnacle Tint | V1 Hardwire | Dinan Performance Software | Gintani Exhaust | H&R Sports Springs | RPI Scoops | BMW CF Spoiler | Challenge Diffuser | Lux H8 V3 | LCI Tail Lights |
Appreciate 0
      08-13-2008, 01:24 AM   #3
Blake
Banned
No_Country
750
Rep
4,649
Posts

Drives: Chevy Aveo
Join Date: May 2008
Location: Parent's Basement

iTrader: (7)

i must have missed the 3000 part
Appreciate 0
      08-13-2008, 01:28 AM   #4
synclastica_86
Captain
synclastica_86's Avatar
Hong Kong
240
Rep
735
Posts

Drives: F32 435i, E92 M3, S550
Join Date: Aug 2008
Location: Hong Kong

iTrader: (0)

Garage List
Quote:
Originally Posted by Davinhci View Post
you sure do love polls!
hahaha...XD... they take the decisions off my hands... ThanX guys!
__________________

Current: BMW F32 435iA M-Sports; BMW E92 M3, M-DCT; Mercedes W221 S550 4matic; Ford Fiesta ST; Nissan Silvia S15 Spec-R
Retired: BMW E93 323iA; BMW E85 Z4 3.0i, SMG; Lexus IS 250 AWD; Lexus GX 470; Mercedes W203 C230 Sportscoupe; Peugeot 206 S16; Peugeot 206 RC
Appreciate 0
      08-13-2008, 01:51 AM   #5
Uli_HH
Lieutenant
Uli_HH's Avatar
Germany
105
Rep
585
Posts

Drives: AW M3 E90)/ 523i Touring
Join Date: Nov 2005
Location: Hamburg Germany

iTrader: (0)

Quote:
Originally Posted by synclastica_86 View Post
... Does it affect your warrenty?...

Lol...really silly question!

BMW could make evident every r.p.m. over 5500 and every overspeeding wíthin the first 3000miles and what do you think is the answer when you have engine troubles - the reason is alike - after ignoring the right breakin and ask for warrenty?

NO CHANCE !!!

There are enaugh threads in this forum about breakin

Uli_HH

P.S. Breakin has nothing to do with religion only with good sense or knowing how costly an engine chance was without warranty.
Appreciate 0
      08-13-2008, 01:51 AM   #6
GT3 Tim
Moderator
GT3 Tim's Avatar
United_States
94
Rep
1,920
Posts

Drives: 2014 MB E63S
Join Date: Feb 2008
Location: Sacramento, CA

iTrader: (0)

Its a catch 22....

To properly break in the motor (ie: seat the rings), you need to exceed 5500 rpms by quite a bit as soon as possible, basically. However, if you have some issues down the road, they could read out your DME and see how you drove it, then blame it on you.

I aint going to debate breakin procedures with everybody. To each his own. I have broken in several new motors, and race-built motors, in my day. None of them ever had any internal issues and never burned any measurable oil. The only internal failure I had was my fault by doing a money shift on my E36 M3. It wasn't a major money shift as I caught it quick and only bent a couple valves! lol. coulda been much worse.

As far as break in, everybody is going to have to do what they think is best. I aint going to debate or judge anybody....its your car, do as you please.
__________________
Tim <--- apparently likes "3" cars
2014 E63S -- The Rocket
2014 F30 328i -- Kids car
2008 E90 M3 -- Sold
2004 GT3 -- Sold
1997 M3/4 -- Sold
1995 M3 -- Sold
Appreciate 0
      08-13-2008, 01:58 AM   #7
synclastica_86
Captain
synclastica_86's Avatar
Hong Kong
240
Rep
735
Posts

Drives: F32 435i, E92 M3, S550
Join Date: Aug 2008
Location: Hong Kong

iTrader: (0)

Garage List
What is the theory behind breaking in? And how dhould it be done?
__________________

Current: BMW F32 435iA M-Sports; BMW E92 M3, M-DCT; Mercedes W221 S550 4matic; Ford Fiesta ST; Nissan Silvia S15 Spec-R
Retired: BMW E93 323iA; BMW E85 Z4 3.0i, SMG; Lexus IS 250 AWD; Lexus GX 470; Mercedes W203 C230 Sportscoupe; Peugeot 206 S16; Peugeot 206 RC
Appreciate 0
      08-13-2008, 02:28 AM   #8
booforty
Major General
booforty's Avatar
United Kingdom
333
Rep
8,811
Posts

Drives: E92 M3
Join Date: Mar 2005
Location: London, UK

iTrader: (0)

Garage List
2008 E92 M3  [0.00]
Second option - as close to the manual as possible
Appreciate 0
      08-13-2008, 02:41 AM   #9
sayemthree
Major General
sayemthree's Avatar
594
Rep
5,448
Posts

Drives: ‘20 X3mC ‘20 Raptor ‘04 X3 6mt
Join Date: Aug 2007
Location: usa so cal , AZ

iTrader: (0)

__________________
Fore Sale Rare 6 speed manual X3 3.oi silver over grey. PM me
Appreciate 0
      08-13-2008, 03:31 AM   #10
Sticky
Banned
United_States
78
Rep
2,244
Posts

Drives: E92 Jerez DCT M3
Join Date: Jan 2008
Location: Anaheim Hills / Malibu

iTrader: (0)

Quote:
Originally Posted by GT3 Tim View Post
Its a catch 22....

To properly break in the motor (ie: seat the rings), you need to exceed 5500 rpms by quite a bit as soon as possible, basically. However, if you have some issues down the road, they could read out your DME and see how you drove it, then blame it on you.

I aint going to debate breakin procedures with everybody. To each his own. I have broken in several new motors, and race-built motors, in my day. None of them ever had any internal issues and never burned any measurable oil. The only internal failure I had was my fault by doing a money shift on my E36 M3. It wasn't a major money shift as I caught it quick and only bent a couple valves! lol. coulda been much worse.

As far as break in, everybody is going to have to do what they think is best. I aint going to debate or judge anybody....its your car, do as you please.
Best post, you need to vary the revs to break it in. Does not mean you have to go full throttle 24/7 once off the factory floor.

Last edited by Sticky; 08-13-2008 at 01:36 PM..
Appreciate 0
      08-13-2008, 07:25 AM   #11
Gearhead999s
Major General
Gearhead999s's Avatar
812
Rep
7,888
Posts

Drives: RR Velar R=Dynamic M2C R1200GS
Join Date: Apr 2007
Location: Toronto

iTrader: (0)

Quote:
Originally Posted by GT3 Tim View Post
Its a catch 22....

To properly break in the motor (ie: seat the rings), you need to exceed 5500 rpms by quite a bit as soon as possible, basically. However, if you have some issues down the road, they could read out your DME and see how you drove it, then blame it on you.

I aint going to debate breakin procedures with everybody. To each his own. I have broken in several new motors, and race-built motors, in my day. None of them ever had any internal issues and never burned any measurable oil. The only internal failure I had was my fault by doing a money shift on my E36 M3. It wasn't a major money shift as I caught it quick and only bent a couple valves! lol. coulda been much worse.

As far as break in, everybody is going to have to do what they think is best. I aint going to debate or judge anybody....its your car, do as you please.

GT3Tim is correct,but I will add 1 thing that a lot of people don't seem to care about and has much more effect on an engines life than the break-in procedure used.Maybe it was a previous life around large diesels & large piston engine aircraft is that I am very anal about proper oil temp before running an engine at 100% power.With all my engines I make sure the chill is off the motor and with the M3 at least 80c oil temp before I take it over 3000 rpm.Without proper oil temp the motor is not fully warmed up and is not at the engineered tolerances and could cause long term problems.Just because it is 35c outside does not mean that you do not need to warm it up before you push it.
Appreciate 0
      08-13-2008, 08:56 AM   #12
ersin
Brigadier General
ersin's Avatar
United_States
124
Rep
4,145
Posts

Drives: 17 YMB F80 M3
Join Date: Mar 2008
Location: Maryland

iTrader: (1)

I am familiar with the school of thought that you need to run the engine hard to properly seat the rings. I'm pretty sure the engine is mostly broken in in that respect before it ever gets to the dealer. But there is also the transmission, differential, brakes, tires, etc. that need to be broken in correctly. Bedding the brakes correctly come to mind as something that seems to be neglected. I doubt this is ever done before you take delivery of the car. (You can look up how to do this on the internet for more info.) Plus, the engine has a different type of oil before the 1200 mile service so I feel that it is best to just go with what BMW says. It doesn't mean you have to completely baby it.

When I got the E46 M3 in '02 I tried to follow the break-in procedures but there was a time or two, sometime during the first few drives that I inadvertently went over 5500 rpm but not by much. This shouldn't hurt anything and BMW never brought it up during any servicing. I did run it pretty hard while still within the BMW recommended procedure and did not baby it. But I varied the speed (and throttle) almost religiously, never went over 100 mph, and floored it (again inadvertently) only once that I can think of. I gradually increased max rpm until 3000 miles. I never had a problem with the engine. It seemed to just get stronger and stronger the older it got.

The bad was that I was subject to the engine bearing recall. I had to go through engine break-in all over again Hopefully, that sort of thing won't happen again.
__________________
2017 F80 YMB.
Appreciate 0
      08-13-2008, 11:21 AM   #13
mkoesel
Moderator
United_States
7506
Rep
19,370
Posts

Drives: No BMW for now
Join Date: Jun 2006
Location: Canton, MI

iTrader: (1)

Quote:
Originally Posted by ersin View Post
I am familiar with the school of thought that you need to run the engine hard to properly seat the rings. I'm pretty sure the engine is mostly broken in in that respect before it ever gets to the dealer. But there is also the transmission, differential, brakes, tires, etc. that need to be broken in correctly. Bedding the brakes correctly come to mind as something that seems to be neglected. I doubt this is ever done before you take delivery of the car. (You can look up how to do this on the internet for more info.)
That's how I look at it too. The engine is probably fine, its the rest of the drivetrain that concerns me.

Quote:
The bad was that I was subject to the engine bearing recall. I had to go through engine break-in all over again Hopefully, that sort of thing won't happen again.
That did suck, but it was worth it for the 100k mi engine warranty
Appreciate 0
      08-13-2008, 11:54 AM   #14
TLud
Colonel
TLud's Avatar
United_States
108
Rep
2,279
Posts

Drives: '12 Golf R
Join Date: Jun 2008
Location: Texas

iTrader: (3)

I've got a long drive on country roads to get home from my dealer. When I first pick up my car, before hitting the highway, I'm going to begin bedding in the brakes (15 minute process followed by taking it easy on the brakes for the first 600 miles). This will also allow the drivetrain and oil to warm up for the engine break-in.

1. Once warm, I'll get on the highway to head back home. I'm going to start by doing 3 half-throttle pulls up to the 5,500 rpm limit, each followed by engine braking down to about 3,000 rpm. I will then pull over for about 15 minutes of cool down.

2. I will then do 3 more pulls at about 3/4 throttle up to about 6,800 rpm, each followed by engine braking down to about 3,000 rpm. I will again pull over for 15 minutes of cool down.

3. I will do 3 final pulls at full throttle up to just below redline, each follwed by engine braking down to about 3,000 rpm. I will again pull over for 15 minutes of cool down.

After this is done, I'm going to take it relatively easy on the car until the 1,200 mile service. I'll make sure to vary the engine load and rpms, and I'm sure I'll go over the 5,500 limit occasionally.

I used this procedure to break in my E46, and it held its oil like a champ, got noticeably stronger over time, and I never experienced any drivetrain issues. I don't see a good poll option for a calculated diversion from the recommended procedure, so I didn't vote.
Appreciate 0
      08-13-2008, 12:28 PM   #15
ihyln
Banned
United_States
85
Rep
3,384
Posts

Drives: M3post sucks
Join Date: Apr 2008
Location: M3post sucks

iTrader: (1)

Garage List
2008 M3  [0.00]
2002 530i  [0.00]
I've accidentally went past the 5500 limit a few times, even the day I drove it off the lot. But only briefly into 6500 territory but I think my engine is better off because of it. I'm still not quite pushing it even after my breakin and thus I don't go past 7000rpm usually.
Appreciate 0
      08-13-2008, 12:57 PM   #16
JEllis
Major General
JEllis's Avatar
529
Rep
5,498
Posts

Drives: E36 M3, E92 M3
Join Date: Oct 2006
Location: Dallas/Ft. Worth

iTrader: (4)

This topic has been discussed many times so I wont go into my thoughts too much...

I understand the philosophy that the auto maker knows best

I also understand the argument that modern engines dont need the same type of break-in the older engines did.

I also understand that the factory takes all engines up to redline before the car leaves the factory so why the restriction?

Personally, I would just go with the book because apparently the dealer will know if you have not and you could run into some issues if the car has any kinds of problems down the road.

Jason
__________________
http://www.m3post.com/forums/signaturepics/sigpic14547_7.gif
Instagram: jellismotorwerks
Appreciate 0
      08-13-2008, 02:30 PM   #17
Gearhead999s
Major General
Gearhead999s's Avatar
812
Rep
7,888
Posts

Drives: RR Velar R=Dynamic M2C R1200GS
Join Date: Apr 2007
Location: Toronto

iTrader: (0)

Quote:
Originally Posted by TLud View Post
I've got a long drive on country roads to get home from my dealer. When I first pick up my car, before hitting the highway, I'm going to begin bedding in the brakes (15 minute process followed by taking it easy on the brakes for the first 600 miles). This will also allow the drivetrain and oil to warm up for the engine break-in.

1. Once warm, I'll get on the highway to head back home. I'm going to start by doing 3 half-throttle pulls up to the 5,500 rpm limit, each followed by engine braking down to about 3,000 rpm. I will then pull over for about 15 minutes of cool down.

2. I will then do 3 more pulls at about 3/4 throttle up to about 6,800 rpm, each followed by engine braking down to about 3,000 rpm. I will again pull over for 15 minutes of cool down.

3. I will do 3 final pulls at full throttle up to just below redline, each follwed by engine braking down to about 3,000 rpm. I will again pull over for 15 minutes of cool down.

After this is done, I'm going to take it relatively easy on the car until the 1,200 mile service. I'll make sure to vary the engine load and rpms, and I'm sure I'll go over the 5,500 limit occasionally.

I used this procedure to break in my E46, and it held its oil like a champ, got noticeably stronger over time, and I never experienced any drivetrain issues. I don't see a good poll option for a calculated diversion from the recommended procedure, so I didn't vote.
I personally would not bother with shutting it off for 15 minutes,driving it easy till the temps come back to normal would be a better thing to do.Shutting it off only allows it to heat soak which does nothing as far as the break-in is concerned.You do have the proper idea though to get the rings seated as fast as possible.
Appreciate 0
      08-13-2008, 03:01 PM   #18
TLud
Colonel
TLud's Avatar
United_States
108
Rep
2,279
Posts

Drives: '12 Golf R
Join Date: Jun 2008
Location: Texas

iTrader: (3)

Quote:
Originally Posted by Gearhead999s View Post
I personally would not bother with shutting it off for 15 minutes,driving it easy till the temps come back to normal would be a better thing to do.Shutting it off only allows it to heat soak which does nothing as far as the break-in is concerned.You do have the proper idea though to get the rings seated as fast as possible.
You read my mind. I've been considering just dropping down to 6th gear and cruising for a few minutes until the temp dropped.
Appreciate 0
      08-13-2008, 04:10 PM   #19
ersin
Brigadier General
ersin's Avatar
United_States
124
Rep
4,145
Posts

Drives: 17 YMB F80 M3
Join Date: Mar 2008
Location: Maryland

iTrader: (1)

Quote:
Originally Posted by TLud View Post
I've got a long drive on country roads to get home from my dealer. When I first pick up my car, before hitting the highway, I'm going to begin bedding in the brakes (15 minute process followed by taking it easy on the brakes for the first 600 miles). This will also allow the drivetrain and oil to warm up for the engine break-in.

1. Once warm, I'll get on the highway to head back home. I'm going to start by doing 3 half-throttle pulls up to the 5,500 rpm limit, each followed by engine braking down to about 3,000 rpm. I will then pull over for about 15 minutes of cool down.

2. I will then do 3 more pulls at about 3/4 throttle up to about 6,800 rpm, each followed by engine braking down to about 3,000 rpm. I will again pull over for 15 minutes of cool down.

3. I will do 3 final pulls at full throttle up to just below redline, each follwed by engine braking down to about 3,000 rpm. I will again pull over for 15 minutes of cool down.

After this is done, I'm going to take it relatively easy on the car until the 1,200 mile service. I'll make sure to vary the engine load and rpms, and I'm sure I'll go over the 5,500 limit occasionally.

I used this procedure to break in my E46, and it held its oil like a champ, got noticeably stronger over time, and I never experienced any drivetrain issues. I don't see a good poll option for a calculated diversion from the recommended procedure, so I didn't vote.
I don't think you'll need to let the engine cool for 15 minutes after a 1/2 or 3/4 throttle to 5500. Just do say, 80% - 90% throttle up to 5500 rpm especially for the first few hundred miles and always keep varying the rpms within break in. Be sure to use lots engine braking during this time. Whether you go to 6800 rpm or redline, or use full throttle is your choice. But BMW recommends against this.

I'm glad to hear that you E46 M3 engine experience was like mine. I'm sure the E9x M3 engine will be just as good.
__________________
2017 F80 YMB.
Appreciate 0
      08-13-2008, 05:57 PM   #20
nusevad
O! So Sour!!
nusevad's Avatar
United_States
549
Rep
15,615
Posts

Drives: Fast 240z / Slow M3
Join Date: Apr 2007
Location: 'Merica!

iTrader: (24)

Garage List
1971 Datsun 240z  [0.00]
2008 M3  [9.60]
religiously for me.
__________________
Appreciate 0
      08-26-2008, 02:49 PM   #21
synclastica_86
Captain
synclastica_86's Avatar
Hong Kong
240
Rep
735
Posts

Drives: F32 435i, E92 M3, S550
Join Date: Aug 2008
Location: Hong Kong

iTrader: (0)

Garage List
I think I'll follow TLud's recipe.
__________________

Current: BMW F32 435iA M-Sports; BMW E92 M3, M-DCT; Mercedes W221 S550 4matic; Ford Fiesta ST; Nissan Silvia S15 Spec-R
Retired: BMW E93 323iA; BMW E85 Z4 3.0i, SMG; Lexus IS 250 AWD; Lexus GX 470; Mercedes W203 C230 Sportscoupe; Peugeot 206 S16; Peugeot 206 RC
Appreciate 0
      08-27-2008, 11:47 AM   #22
adamr
Major
adamr's Avatar
South Africa
71
Rep
1,032
Posts

Drives: 997 GT3 RS
Join Date: Dec 2006
Location: Johannesburg

iTrader: (0)

Garage List
ok had my 2000km service and the car is perfect!!!!... it used no oil in this time and the car seems louder and more smoother after the service ... its on 2400km now

this is how i drove her in

For the 1st 900km i did not go over the 5500RPM ... after 900km, i pushed the car ... but everytime i drove the car id do the following:

1. Id drive off immediately after starting the car, but id leave the car in D1 mode and keep it under 3000km until the oil warmed up to the middle mark, i always make sure the oil is warm, before pushing the car even over 3000RPM
2. Id then push the car, test the 5500RPM band for a bit then push it a little more to 7000RPM and then some red lining as well ... id vary my engine speed a lot ...
3. Cool down the car by driving slowly again until the oil temp dropped to about the 100 mark again, when at home, let it idle for a wee bit and then switch off ...
__________________


2007 Porsche 997 GT3 RS
|PCM with NAV and GSM|Roll Cage|PCCB|Xenons|Sports Chrono Plus|PASM|Leather Pack|Silver Seat-belts|
Appreciate 0
Post Reply

Bookmarks

Tags
1200, 5500rpm, break-in

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 05:47 AM.




m3post
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST