I'm repairing my wheel due to curb rash....need some inputs.

csupernova · 07-12-2008, 07:33 PM

Hi guys

I have been following the DIY here on repairing the wheel. I have put the putty and sanded it down. Then primed it.

Now, I sprayed a few light coats of silver spray (1Z Einszett Silver Spray). Up to this stage, the paint feels very rough. Is this normal or should I wet-sand them before clear coat?

Any thoughts?

DrGP · 07-13-2008, 06:42 PM

Yes, 600 grit.

07-12-2008, 07:33 PM	#1
csupernova Captain 32 Rep 606 Posts Drives: E90 330i Join Date: Sep 2007 Location: NYC iTrader: (7)	I'm repairing my wheel due to curb rash....need some inputs. Hi guys I have been following the DIY here on repairing the wheel. I have put the putty and sanded it down. Then primed it. Now, I sprayed a few light coats of silver spray (1Z Einszett Silver Spray). Up to this stage, the paint feels very rough. Is this normal or should I wet-sand them before clear coat? Any thoughts?
	Appreciate 0 Tweet Quote

07-13-2008, 06:42 PM	#2
DrGP Lieutenant Colonel 137 Rep 1,914 Posts Drives: Sapphire 335i coupe Join Date: Oct 2006 Location: SE, PA iTrader: (0)	Yes, 600 grit.
	Appreciate 0 Quote