where can we get this ventech rear bumper? Or similar

J. Dub · 07-11-2016, 10:21 AM

**UPDATE** Please see latest post from 7/30/16

I am looking for a rear bumper that is aggressive with vents similar to the 1m

I know JGMods use to sell this rear bumper below called the ventech.

bimmerclad · 07-11-2016, 10:41 AM

I have and e90 and i have been looking for the ventech rear bumper everywhere. +1 on this becuase it looks great

Turbo_power4ever · 07-11-2016, 01:36 PM

damn, thats a nice rear bumper.

J. Dub · 07-11-2016, 05:18 PM

Quote:

Originally Posted by bimmerclad

I have and e90 and i have been looking for the ventech rear bumper everywhere. +1 on this becuase it looks great

bimmerclad have you found anything remotely similar? Have you checked alibaba?
It's my understanding that JGmods DOES NOT create molds they outsource. Who was their vendor sourcing them I wonder.

**UPDATE** They do in fact create their own molds for this bumper. I was wrong.

whosdady · 07-11-2016, 09:39 PM

Quote:

Originally Posted by J. Dub

Quote:

Originally Posted by bimmerclad

I have and e90 and i have been looking for the ventech rear bumper everywhere. +1 on this becuase it looks great

bimmerclad have you found anything remotely similar? Have you checked alibaba?
It's my understanding that JGmods DOES NOT create molds they outsource. Who was their vendor sourcing them I wonder.

I'm not sure who actually made them? All I can tell you is only a hand full were made. I tried to order one while they were still selling them and they quoted a 2 month wait period. I ended up going with the m3 rear bumper...

J. Dub · 07-11-2016, 10:13 PM

Quote:

Originally Posted by whosdady

I'm not sure who actually made them? All I can tell you is only a hand full were made. I tried to order one while they were still selling them and they quoted a 2 month wait period. I ended up going with the m3 rear bumper...

For fucks sake this is a first world problem.

BSM n54iS · 07-12-2016, 04:46 AM

Just take an axe to your current...one swift chop into it

I must say I do like the look of that though, with some cf side fins and diffuser etc..looks clean

bimmerclad · 07-12-2016, 07:16 AM

Quote:

Originally Posted by J. Dub

bimmerclad have you found anything remotely similar? Have you checked alibaba?
It's my understanding that JGmods DOES NOT create molds they outsource. Who was their vendor sourcing them I wonder.

I have not found anything that resembles it at all anywhere. So strange, it can't be that hard to make compared to something like the mtech, why would you not continue if demand is high?

J. Dub · 07-12-2016, 08:54 AM

I spoke with JGmods. Truly they are the only ones with the mold and this is why we're not seeing it on sites like ebay or alibaba.
He is going to have a meeting with his team later this week to discuss the potential of recreating the mold.

I asked if it would take a certain amount of interest to re-create the mold. He stated no. So fingers cross the team brings it back.

I stirred up interest for the N55 exhaust burbble to be brought to our N54 platform, and we got it. Seen here http://www.e90post.com/forums/showthread.php?t=1209274

I hope we get this too.

bimmerclad · 07-12-2016, 10:07 AM

Quote:

Originally Posted by J. Dub

I spoke with JGmods. Truly they are the only ones with the mold and this is why we're not seeing it on sites like ebay or alibaba.
He is going to have a meeting with his team later this week to discuss the potential of recreating the mold.

I asked if it would take a certain amount of interest to re-create the mold. He stated no. So fingers cross the team brings it back.

I stirred up interest for the N55 exhaust burbble to be brought to our N54 platform, and we got it. Seen here http://www.e90post.com/forums/showthread.php?t=1209274

I hope we get this too.

Wow this sounds great. Fingers crossed as well. I just really hope the price is decent. I dont wanna pay to much more that i would for something like the mtech.

Supra2k6 · 07-12-2016, 10:33 AM

Quote:

Originally Posted by J. Dub

For fucks sake this is a first world problem.

I got a similar rear bumper from a local company. Ill post pics E90

bimmerclad · 07-12-2016, 02:31 PM

Quote:

Originally Posted by Supra2k6

I got a similar rear bumper from a local company. Ill post pics E90

Lets see them

J. Dub · 07-12-2016, 05:49 PM

Quote:

Originally Posted by bimmerclad

Lets see them

The 4 door grey is supra2k6's car.

The white one is a bumper I found on the internet but not sure who makes it.
The red is obviously J's at JG mods that I found on his facebook.

The ventech is just perfect. Not too big. Not too small. And I like how on the ventech the top slit is longer than the bottom slit.

Route 16 · 07-12-2016, 06:53 PM

Quote:

Originally Posted by J. Dub

bimmerclad have you found anything remotely similar? Have you checked alibaba?
It's my understanding that JGmods DOES NOT create molds they outsource. Who was their vendor sourcing them I wonder.

**UPDATE** They do in fact create their own molds for this bumper. I was wrong.

why nobody likes my picture?

Supra2k6 · 07-12-2016, 09:28 PM

i'm pretty sure the white m3 is photoshopped. I took better pics i'll post them up.

Mine was done by Industry garage in Baltimore. They're a full custom body shop i'm sure they can do any style you're looking.

Supra2k6 · 07-12-2016, 09:45 PM

pics

bimmerclad · 07-12-2016, 09:55 PM

Quote:

Originally Posted by Route 16

why nobody likes my picture?

Your car is the reason i started wanting that bumper. Lol i remember asking you what kinda it was. It looks so good

J. Dub · 07-12-2016, 10:53 PM

Quote:

Originally Posted by Supra2k6

Your photos don't have photo file extensions on them brother. They won't work Supra2k6

BSM n54iS · 07-13-2016, 06:55 AM

Quote:

Originally Posted by J. Dub

I spoke with JGmods. Truly they are the only ones with the mold and this is why we're not seeing it on sites like ebay or alibaba.
He is going to have a meeting with his team later this week to discuss the potential of recreating the mold.

I asked if it would take a certain amount of interest to re-create the mold. He stated no. So fingers cross the team brings it back.

I stirred up interest for the N55 exhaust burbble to be brought to our N54 platform, and we got it. Seen here http://www.e90post.com/forums/showthread.php?t=1209274

I hope we get this too.

Let us know what you hear back from them..I'm seriously wanting this now lol its really grown on me, hope the price would be decent. Same PU material as their m3 skirts?

J. Dub · 07-13-2016, 09:50 AM

Quote:

Originally Posted by Black n54is

Let us know what you hear back from them..I'm seriously wanting this now lol its really grown on me, hope the price would be decent. Same PU material as their m3 skirts?

I have heard back from them. Here is what they said "In order for us to do this, there would be a pretty long wait period. If people are fine with that then I think we can probably put things back into gear. The Venting process normally takes about 6 weeks time. That's on top of the time for us to have the bumper itself in stock prior to venting.
Best,
JG"

Now here was my response "JG, would you like me to get a list perhaps on e90 forums?
If so, I’m sure the guys will ask if the bumper will be ONLY for e92 335i.
I’m ok with the wait period. But I can most certainly ask others as well on all the forums if you’d like.

Now, with this in mind. I am happy that they're even entertaining the idea.
But GREAT point. What material will it be made out of is a great question. I will ask them.

And another thought I had. What if we could send OUR bumpers to JG for the 6week wait? If you re-read his email, it sounds like they hand slit these open.

9krpmrx8 · 07-13-2016, 10:00 AM

Not feeling it on the E90, it looks just like what it is, a random cut in the bumper that doesn't flow with the exterior of the E90 at all. It's a little better on the E92 but still doesn't flow.

Jacblack · 07-13-2016, 10:50 AM

The white e92 is not photoshopped it's a full widebody on a 335, I've seen that car in person it's pretty clean.

07-11-2016, 10:21 AM	#1
J. Dub Bob Saget 355 Rep 2,229 Posts Drives: 2010 335i e92 N54 A/T Join Date: Jun 2010 Location: AR - 501 iTrader: (15)	where can we get this ventech rear bumper? Or similar UPDATE Please see latest post from 7/30/16 I am looking for a rear bumper that is aggressive with vents similar to the 1m I know JGMods use to sell this rear bumper below called the ventech. __________________ In memory of Robert E. Flynn (AR) Last edited by J. Dub; 07-30-2016 at 11:44 PM..
	Appreciate 0 Tweet Quote

07-11-2016, 10:41 AM	#2
bimmerclad First Lieutenant 100 Rep 362 Posts Drives: 2006 e90 330i Join Date: Dec 2013 Location: florida iTrader: (0)	I have and e90 and i have been looking for the ventech rear bumper everywhere. +1 on this becuase it looks great
	Appreciate 1 Renegadenick88.00 Quote

07-11-2016, 01:36 PM	#3
Turbo_power4ever Captain 93 Rep 606 Posts Drives: Fbo blacked e92 Join Date: Feb 2015 Location: Nky iTrader: (2)	damn, thats a nice rear bumper.
	Appreciate 0 Quote

07-12-2016, 04:46 AM	#7
BSM n54iS Brigadier General 2685 Rep 4,202 Posts Drives: '11 335is \| '16 Macan Turbo Join Date: Aug 2015 Location: Everywhere and Nowhere iTrader: (7)	Just take an axe to your current...one swift chop into it I must say I do like the look of that though, with some cf side fins and diffuser etc..looks clean __________________ '11 335is BSM MT "BMW Performance Editon" \| '16 Porsche Macan Turbo GruppeM CF Intake \| AR Resonated DP \| ER CP \| Turbosmart RacePort BOV \| Cobb FMIC \| RB Inlets \| RB External Mishi/Turner OCC \| Michelin PS4 \| BMW Performance Springs/Bilstein B8 + Dinan & M3 bits \| BMW Brembo BBK \| BMW Performance CF Spoiler \| BMW Performance CF Lip \| BMW Performance Alcantara \| PS Designs GTS Armrest \| AG H6-40 \| Rear Seat Delete
	Appreciate 0 Quote

07-12-2016, 08:54 AM	#9
J. Dub Bob Saget 355 Rep 2,229 Posts Drives: 2010 335i e92 N54 A/T Join Date: Jun 2010 Location: AR - 501 iTrader: (15)	I spoke with JGmods. Truly they are the only ones with the mold and this is why we're not seeing it on sites like ebay or alibaba. He is going to have a meeting with his team later this week to discuss the potential of recreating the mold. I asked if it would take a certain amount of interest to re-create the mold. He stated no. So fingers cross the team brings it back. I stirred up interest for the N55 exhaust burbble to be brought to our N54 platform, and we got it. Seen here http://www.e90post.com/forums/showthread.php?t=1209274 I hope we get this too. __________________ In memory of Robert E. Flynn (AR)
	Appreciate 0 Quote

07-12-2016, 09:28 PM	#15
Supra2k6 Lieutenant 132 Rep 573 Posts Drives: 335i Join Date: Dec 2013 Location: The District iTrader: (1)	i'm pretty sure the white m3 is photoshopped. I took better pics i'll post them up. Mine was done by Industry garage in Baltimore. They're a full custom body shop i'm sure they can do any style you're looking. Last edited by Supra2k6; 07-12-2016 at 09:47 PM..
	Appreciate 0 Quote

07-12-2016, 09:45 PM	#16
Supra2k6 Lieutenant 132 Rep 573 Posts Drives: 335i Join Date: Dec 2013 Location: The District iTrader: (1)	pics Last edited by Supra2k6; 07-13-2016 at 09:51 AM..
	Appreciate 0 Quote

07-13-2016, 10:00 AM	#21
9krpmrx8 Clean is the new cool, keep it that way. 808 Rep 1,685 Posts Drives: 11' Alpine White 335i Sedan Join Date: Jan 2016 Location: San Antonio, Texas iTrader: (0)	Not feeling it on the E90, it looks just like what it is, a random cut in the bumper that doesn't flow with the exterior of the E90 at all. It's a little better on the E92 but still doesn't flow. __________________ 2011 335i, FBO, N55+ Turbo, full E85, S55 intercooler, etc. 2015 X5 35i Xdrive
	Appreciate 0 Quote

07-13-2016, 10:50 AM	#22
Jacblack Captain 91 Rep 664 Posts Drives: F80 COMP Join Date: Dec 2013 Location: Maryland iTrader: (0)	The white e92 is not photoshopped it's a full widebody on a 335, I've seen that car in person it's pretty clean.
	Appreciate 0 Quote