05-07-2015, 07:59 PM | #1 |
Captain
432
Rep 887
Posts
Drives: Enzo F23 228i
Join Date: May 2015
Location: MD, USA
|
Oil Catch Can
Just finished installing a BMS Oil Catch Can and I was surprised as to the amount of oil in the tubes already. Have to say, super easy mod!
|
05-09-2015, 10:05 PM | #3 |
Captain
432
Rep 887
Posts
Drives: Enzo F23 228i
Join Date: May 2015
Location: MD, USA
|
|
Appreciate
0
|
05-25-2015, 08:37 PM | #5 |
Captain
432
Rep 887
Posts
Drives: Enzo F23 228i
Join Date: May 2015
Location: MD, USA
|
|
Appreciate
0
|
06-22-2015, 05:28 PM | #6 |
Captain
463
Rep 957
Posts |
I have the Bms one on my car, full bolt on car running meth and 18 psi with lots of track use (at least 800 miles with the catch can on).
Catch can is completely empty. I would spend your money elsewhere. These cars don't need them, or at least mine does not. |
Appreciate
0
|
01-03-2016, 08:36 PM | #7 | |
Colonel
1569
Rep 2,401
Posts
Drives: E46 ZCP, F85, E70, G07
Join Date: Mar 2006
Location: Outside Atlanta
|
Quote:
__________________
|
|
Appreciate
0
|
01-06-2016, 07:41 PM | #8 |
Captain
432
Rep 887
Posts
Drives: Enzo F23 228i
Join Date: May 2015
Location: MD, USA
|
|
Appreciate
0
|
01-06-2016, 10:45 PM | #9 |
Captain
463
Rep 957
Posts |
Track and some weekend driving, usually car will do 700 miles on a track weekend including commute, so figure 200-250 miles of track use, wot, lots of sustained 1g plus turns. If it's not getting oil in the can under those conditions I can't imagine when it would. Operating temp, oil usually 225-240 on track, I also run a thicker oil so that may have an effect.
|
Appreciate
0
|
Post Reply |
Bookmarks |
Thread Tools | Search this Thread |
|
|