|
|
|
|
PLEASE HELP SUPPORT E90POST BY DOING YOUR TIRERACK SHOPPING FROM THIS BANNER, THANKS! |
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
What to do next
|
|
Wheels and Tires forum Sponsored by The Tire Rack
Please help to directly support e90post by doing your tirerack shopping from the above link. For every sale made through the link, e90post gets sponsor support to keep the site alive. Disclaimer |
|
Thread Tools | Search this Thread |
01-31-2015, 07:08 AM | #1 |
Private
4
Rep 83
Posts |
What to do next
My 313 style wheels have started to corrode now, caused by a couple of things the weather rain/cold the salt/grit on the roads and I don't want to spend money getting them diamond cut for the same thing to happen again which i'm sure it will if a stone chip appears in the laquer then it will start to eat into the diamond cut face and then I'm back to square one.
So just wanting to put this out there I myself cannot imagine the car with solid colour wheels like black/grey/silvers so what has everyone else done on here that's come across this problem? When I first got the vehicle I removed the wheels cleaned and sealed done this to them twice but it still has not prevented the diamond cut face corroding. Although I am sure the wheels have had a smart repair done to them but I don't want to take the risk of spending that much on diamond cut to be in the same boat a year to 18 months down the line. Brian |
Bookmarks |
|
|