[darkfaker]

can I go 19x8.5 ET45 Tire size245/35 to xdrive? Or it's too wide?

[VMRWheels]

Originally Posted by darkfaker

can I go 19x8.5 ET45 Tire size245/35 to xdrive? Or it's too wide?

19x8.5 ET45 with 245/35 will most likely cause issues in the front.

In previous test fits, 8.5 ET45 required a 5mm spacer to clear the strut. After the 5mm spacer, you may need a bit of negative camber and/or fender modification to provide enough fender clearance.

[darkfaker]

Originally Posted by VMRWheels

19x8.5 ET45 with 245/35 will most likely cause issues in the front.

In previous test fits, 8.5 ET45 required a 5mm spacer to clear the strut. After the 5mm spacer, you may need a bit of negative camber and/or fender modification to provide enough fender clearance.

so 235/35 should be fine, right?

[VMRWheels]

Originally Posted by darkfaker

so 235/35 should be fine, right?

Check out this thread, he's running our VMR V710 in 19x8.5 ET35 with 235/35/19 (FRONT)

http://www.2addicts.com/forums/showt...&highlight=vmr

^ Looking at this, I assume 8.5 ET40 with 235/35/19 shouldn't pose any issues. That being said, of course, there would be more to account for if you decide to go lower etc.