[bbradyc5]

Going out on a limb here that someone may have access to a set of F9x cylinder heads to be able to make a traced template of the intake ports and manifold bolt hole locations. Would be willing to pay for your troubles if you could get me this info. Need data for my project on custom designing port injection intake manifolds for our application and need to ensure the injectors are centered on each intake port in the design. If anyone has a lead on someone or a shop that may have a motor out of a car or a set of heads laying around that could possibly supply me this data it would be appreciated.

[bbradyc5]

Bueller?

[Stück]

RK Autowerks already cornered the market there.

https://www.rkautowerks.com/index.ph...ake-manifolds/

[bbradyc5]

Originally Posted by Stück

RK Autowerks already cornered the market there.

https://www.rkautowerks.com/index.ph...ake-manifolds/

Im aware of the RK design option. Their manifolds are not designed/setup for port injection. There are some very tight clearances around our intake manifolds that make the manifold design adding injectors and a fuel rail a very tricky objective.