[serhat06]

Originally Posted by BMWDriverX

When do you think the filters will be available?

min 3 months,

[BMWDriverX]

Originally Posted by serhat06

min 3 months,

Got it, well i'll be on the look out for when they are ready and I will buy a set

[JBA87]

I like MsR intakes

[serhat06]

Originally Posted by 2indapink

Looks like PG is 💩. I don't know how I would feel dropping $1k on some silicon tubing with filters at the end. IF anything I would of ran RK Tunes intakes which is a similar setup except they are aluminum 3.5in tubing. Only a couple bucks more. If you spend $120k on a car, whit not an extra couple hundred on a well fabricated product?

you cant fabricate silicone, and pg stopped making them metal/aluminum, due heat soak issues, also not to mention making silicone mold and manufacturing cost is %30 higher then just buying some pipes and welding them together.
and here are 2 references, with some good numbers, enjoy

[serhat06]

Originally Posted by 2indapink

You can't just "weld some pipes together". if anything the same amount of work is required if not more. You can make a mild & inject it with silicon. Piping takes more work to get the bends done correctly for figment. RK's piping has no welds. It's one piece bent aluminum piping. Same design of PG so you'll prob get the same "numbers".

you can not inject Nylon mesh thats reinforce the silicone pipes. pg f90 down pipes are 3d bend so we are using both technologies to manufacture parts, and still choosing silicone over metals.
i am not saying only intakes make that power,(tunes play biggest role) but feel free to post some results.

[JBA87]

I don't see what those dragy numbers have to do with the quality of the intakes Or the improvement in times resulting from the intakes

You are posting them "as-if" the intakes resulted in those times.

[GranitM5]

Originally Posted by serhat06

you cant fabricate silicone, and pg stopped making them metal/aluminum, due heat soak issues, also not to mention making silicone mold and manufacturing cost is %30 higher then just buying some pipes and welding them together.
and here are 2 references, with some good numbers, enjoy

Steven F90 was also running E30 when he managed 5.92

[JBA87]

I think the other car has upgraded turbos

[BMWDriverX]

Originally Posted by 2indapink

Looks like PG is 💩. I don't know how I would feel dropping $1k on some silicon tubing with filters at the end. IF anything I would of ran RK Tunes intakes which is a similar setup except they are aluminum 3.5in tubing. Only a couple bucks more. If you spend $120k on a car, whit not an extra couple hundred on a well fabricated product?

You're looking at a front mount intake that is less than half the price of the rest of the front mount intakes on the market and it does the exact same thing at half the cost and you're talking about the materials that you don't understand because you are just mad mad that you probably paid double to achieve the same exact results, or you don't have enough money to buy either, clown

[serhat06]

Originally Posted by JBA87

I don't see what those dragy numbers have to do with the quality of the intakes Or the improvement in times resulting from the intakes

You are posting them "as-if" the intakes resulted in those times.

all you have to do is read, brother.

Originally Posted by serhat06

you can not inject Nylon mesh thats reinforce the silicone pipes. pg f90 down pipes are 3d bend so we are using both technologies to manufacture parts, and still choosing silicone over metals.
i am not saying only intakes make that power,(tunes play biggest role) but feel free to post some results.

[BMWDriverX]

Originally Posted by 2indapink

Your so right. My 2020 F90 M5 was very hard to afford. Also, the $200 more I paid for RK intakes made out of quality materials really broke the bank. Thanks for bringing me back down to earth.

What are the quality materials that were used, educate us please? Chinese made plastic coated in resin, is that what you're trying to tell me that you paid $200 more for?

[YanoM5]

Just my .02, I've ran both PG and RK Tune on my F10. I wanted to powder coat mine so I switched to RK Tune. The PG ones are made really well with thick silicone and performed well. The RK Tune piping looked good, but the material before powder coating looked very um, thinnish and cheap w/o a paint job. RK tune worked great though.

They both worked well and served it's purpose.

F10 M5 by Justin J, on Flickr

[bm5bullit]

The install of your CAI does look sharp and the quality appears to be first class. Congrats!!

[serhat06]

@[YanoM5] not giving up on YasMarina Blue!

[BMWDriverX]

Originally Posted by serhat06

@[YanoM5] not giving up on YasMarina Blue!

How are we looking on the new filters for the front mounts?

[serhat06]

Originally Posted by BMWDriverX

How are we looking on the new filters for the front mounts?

Ill have the first sample this week, and ill need to perform
Some tests. Once we approve we can start and finish mass production in 4 weeks.

[BMWDriverX]

Originally Posted by serhat06

Ill have the first sample this week, and ill need to perform
Some tests. Once we approve we can start and finish mass production in 4 weeks.

Great!

[YanoM5]

Originally Posted by serhat06

@[YanoM5] not giving up on YasMarina Blue!

Yes, I love my Yas Marina Blue. Thanks for Project Gamma & Sam for the great look and product!

Grill by Justin J, on Flickr

[YanoM5]

Did a recent photo shoot with Nardo. I love how these Project Gamma intakes pop!

M5 photo shoot by Justin J, on Flickr

M5 photo shoot by Justin J, on Flickr

M5 photo shoot by Justin J, on Flickr

[RonMexico]

What is the difference between the long and short extension options for the Carbon Fiber intakes?

[QatarPool]

Originally Posted by RonMexico

What is the difference between the long and short extension options for the Carbon Fiber intakes?

short extension will require V BAR removal or you have to flip them upside down. long extension will be easier in installation.
but my concern is will the long extension affect Rad BADLY ??

[GTATX]

Originally Posted by QatarPool

short extension will require V BAR removal or you have to flip them upside down. long extension will be easier in installation.
but my concern is will the long extension affect Rad BADLY ??

No issues with Rad. I have been running it for 5 months in Central Texas on aggressive stage 2 and no issues at all. Thx