|
|
04-13-2018, 12:35 AM | #1 |
Major
448
Rep 1,263
Posts |
F/S OSRAM Night Breaker D1S HID Upgrade
I have a pair of OSRAM Night Breaker HID upgrades for sale in D1S size. They were in my car for 6 months and I don't drive everyday during the night time. The bulbs are plug and play for the E9X M3. People typically upgrade to OSRAM CBI's at 5500k, but these are brighter and light up the road better, even when it's wet. I chose the brighter versus aesthetics upgrade route. These are ~4350k and have the right balance of color and actual light on the road. OSRAM advertises these as up to +70% brightness and up to +20m longer beam. You can find these for waaaay less on ebay... because they're fakes. For serious buyers, I can give you the serial numbers and batch numbers for you to check yourself on OSRAM's authenticity website. $SOLD shipped for the pair. Last edited by JsL; 04-17-2018 at 01:29 PM.. |
04-13-2018, 01:24 AM | #3 |
Major
448
Rep 1,263
Posts |
I just edited my post to give OSRAM's claims of up to +70% brightness and up to +20M longer beam.
They are noticeably brighter than stock lights and project farther. The color is perfect IMO, as it doesn't get absorbed into black pavement/wet surfaces while remaining white to the eyes. Last edited by JsL; 04-13-2018 at 03:44 AM.. |
Appreciate
0
|
04-13-2018, 05:32 PM | #6 |
Major
448
Rep 1,263
Posts |
There is no blue at all. Just a little bit whiter than stock. If you're looking for blue-ish, OSRAM CBI, CBH or CBB is for you. If you do buy the CBI or other bulbs, don't be lured by the low prices on ebay.
|
Appreciate
0
|
04-13-2018, 08:16 PM | #8 |
Major
448
Rep 1,263
Posts |
Not difficult, no bumper removal necessary. Jack up car, remove wheel, remove fender liner, remove 5 torx screws, unclip hid connector, unclip hid bulb and put new bulb in. Reverse the process.
|
Appreciate
0
|
04-15-2018, 03:10 AM | #10 |
Major
448
Rep 1,263
Posts |
|
Appreciate
0
|
04-17-2018, 01:13 PM | #14 |
Private
37
Rep 50
Posts |
__________________
13 M3 Coupe Stripper 6MT Space Gray / Black / Carbon - Dinan intake, pulley, springs, toe links, monoballs, strut braces, ride and handling kit with Bilstein B8's, MPE V2, MP Carbon Spoiler, UCP, Autosolutions SSK, Turner Solid Subframe bushings, Goodridge ss lines
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|