06-14-2020, 07:16 PM | #25 |
Lieutenant
357
Rep 435
Posts |
60-130
6.1 on pump gas with no meth running. The recent build is a 2020 car which is trans tune limited. Going further than where it currently is trips the trans failsafe. Once the trans firmware is released it will pickup another 150-200wtq. Peak power will pickup another 40-50whp. |
Appreciate
0
|
06-14-2020, 07:21 PM | #26 |
Lieutenant
357
Rep 435
Posts |
https://ibb.co/Z2kjX3H
https://ibb.co/30VMKwZ Same turbos, same engine configuration, shows how much torque is being limited. https://ibb.co/PmjTyYk Switching our shop car to g35-900, stay tuned for more info in following weeks. If someone can help make these images post on here that would be great. Thanks -Raza Last edited by Sales@RKautowerks; 06-14-2020 at 07:44 PM.. |
Appreciate
0
|
06-17-2020, 10:57 AM | #29 | |
Lieutenant
357
Rep 435
Posts |
60-130
6.1 on pump gas with no meth running. The recent build is a 2020 car which is trans tune limited. Going further than where it currently is trips the trans failsafe. Once the trans firmware is released it will pickup another 150-200wtq. Peak power will pickup another 40-50whp. Quote:
|
|
Appreciate
1
whatnotsomuchf80247.50 |
06-17-2020, 01:49 PM | #30 |
Captain
239
Rep 978
Posts |
Pencilling this in my plans for my final mod! I was communicating with you guys when I was modding my F10 M5 but unexpectedly bought an F90. Great work so far.
__________________
2021 M340i
2020 X3 M40i - her car 2019 M5, AW, DP's, MSR CAI, BM3, SOLD 2020 Chev. ZR2 Bison truck, Daily Driver |
Appreciate
1
dhm11819.00 |
06-18-2020, 01:10 PM | #31 | |
Second Lieutenant
40
Rep 221
Posts |
Quote:
|
|
Appreciate
0
|
06-28-2020, 10:35 AM | #32 | |
Lieutenant
357
Rep 435
Posts |
Quote:
-Raza, spell it right. |
|
Appreciate
1
whatnotsomuchf80247.50 |
06-28-2020, 10:46 AM | #33 |
Second Lieutenant
116
Rep 248
Posts |
I had a built F13 M6 built by RK Autowerks picked it up from their shop in texas and drove it home 1000miles last month. Running G25-660 turbos. 900whp / 930wtq. Took it to the track for the first time ever in my life this past weekend. My first run was 10's @ 140. Spinning in 2nd on r888r's. Lots of improvements still for the track and myself but i'm beyond happy. You'll see some street stuff coming up when time permits. You can't go wrong with RK and team. Oh and btw, all on flash tune with Cedar Performance / Utkursa.
__________________
14 M6 Sakhir Coupe | RK Autowerks Built Motor | G25-660 | Snow Performance Meth | RK DP | 4mm bored throttle bodies | SSP-X | SSP Trans Pan | RK Billet Diff Mount | DSS Axles | Rkautowerks carbon charge pipes | CSF Intercoolers |Akro exhaust | Gapped Plugs |RK intakes | 900whp/930wtq
|
Appreciate
2
dhm11819.00 BadCompany83.00 |
06-28-2020, 12:50 PM | #34 |
Lieutenant
107
Rep 411
Posts |
Still very interested in seeing some low 5s and high 4s on the 60-130mph for the f90s on dragy. I'm
Not impressed by a build doing 6.1s on the 60-130s, as you can do that with 93/jb4 and meth or e30 pretty easily .. There are two other built M5s on dragy doing 4.5-4.88 on 60-130 ... It will be interesting to see what evolve does ! |
Appreciate
0
|
06-28-2020, 03:23 PM | #35 |
Captain
239
Rep 978
Posts |
Awesome results and work. I do think that some more pics with your clients, the builds and some dyno videos would go a long way in showing members the caliber of your work.
__________________
2021 M340i
2020 X3 M40i - her car 2019 M5, AW, DP's, MSR CAI, BM3, SOLD 2020 Chev. ZR2 Bison truck, Daily Driver |
Appreciate
0
|
06-29-2020, 05:39 PM | #36 | |||
Lieutenant
357
Rep 435
Posts |
Quote:
Quote:
It's also to note the builds doing low 6 60-130 are also blowing motors. But nobody likes to mention that little detail. Quote:
-R |
|||
Appreciate
0
|
07-01-2020, 08:27 PM | #37 | ||||
Private First Class
114
Rep 164
Posts |
Quote:
|
||||
Appreciate
0
|
07-02-2020, 12:30 AM | #39 |
Brigadier General
1690
Rep 3,200
Posts |
Howzit Raza!
Kimo here. Wanted to say your imola beast is sounding crazy. Had a two questions about it. You mentioned the Freon chiller kit. Can you elaborate on that yet? Also, charge coolers for the f90 platform in the works? |
Appreciate
0
|
07-05-2020, 11:03 AM | #40 |
Second Lieutenant
40
Rep 221
Posts |
Doesn't seem like we're gonna get any numbers . These kits should be in the high 4's very low 5's but that's not even close to what these kits cost even after the 30k they are asking to do one of these . Seems worthless to me and the guys who are spending this type of money just have money to blow and don't care about much else .
|
Appreciate
0
|
07-08-2020, 07:04 PM | #42 |
Banned
3322
Rep 8,083
Posts |
40k build... lol just buy a lighter car...
|
Appreciate
3
|
07-09-2020, 03:47 PM | #44 | ||||
Lieutenant
357
Rep 435
Posts |
Quote:
Quote:
Quote:
I'm in the final stages of the freon chiller testing, we have a standalone control unit that we're dialing in. I'll let you know when it's done. My numbers still the same so feel free to reach out! The coolers i finished design on almost 6-8 months ago now, but COVID messed that up from a supply chain and logistics standpoint. Ravi(CSF) owner says we'll be seeing the final units within next month or so. Quote:
Here let me give you a hint, scroll up. Because i have nothing to prove to you. Who are you again? Dont care. ^this, but it sounds better when numbers are double or triple. -Raza |
||||
Appreciate
0
|
Post Reply |
Bookmarks |
|
|