[ECSTuning]

Avoid the anxiety with the Turner Motorsport F90 M5 skid plate! The S63 shares a factory flaw with the S55, the notorious low hanging oil cooler. This poor design from the factory placed the engine oil cooler at the bottom of the car, right under the front bumper. Because of this, it is in a very vulnerable place. Road debris such as branches, rocks, tires, and trash, can easily puncture this low hanging oil cooler and drain all of the engine's oil within seconds, ultimately causing catastrophic engine failure if the car is not immediately shut off.

Turner Motorsport F90 M5 Skid Plate



Turner Motorsport F90 M5 Skid Plate

[soopa]

Is this a simple bolt-on?

[VeNoM__M5]

Originally Posted by soopa

Is this a simple bolt-on?

Yes

[CanadianF90M5]

Has anyone put together a video on how to install it? Can the install be done DIY or is there lots of cutting and drilling?

[soopa]

I found the installation manual for this product.
http://bd8ba3c866c8cbc330ab-7b26c6f3...stallation.pdf

There is another product that requires cutting and drilling.

[CanadianF90M5]

Originally Posted by soopa

I found the installation manual for this product.
http://bd8ba3c866c8cbc330ab-7b26c6f3...stallation.pdf

There is another product that requires cutting and drilling.

Thanks for this ... looks very easy to install with no drilling or cutting.

Looking more closely at the product, I'm a little surprised the open area over the oil cooler isn't protected by a screen or something to better protect the cooler (from smaller items coming up and hitting it) Or would that negatively impact the ability of the cooler to do its job?

[ECSTuning]

install on this one is very easy, just remove stock pannels and replace with the skid plate.

[CanadianF90M5]

Originally Posted by ECSTuning

install on this one is very easy, just remove stock pannels and replace with the skid plate.

Do you ship to Canada? If so, free shipping or at what cost?

[ECSTuning]

Originally Posted by CanadianF90M5

Do you ship to Canada? If so, free shipping or at what cost?

We do ship to Canada, but the Free Shipping option on this only applies to the lower 48 states. Shoot me a PM with the full address and I can do a manual quote and see if we can get the shipping cost lower than the normal quotes for you.

James

[CanadianF90M5]

Originally Posted by ECSTuning

We do ship to Canada, but the Free Shipping option on this only applies to the lower 48 states. Shoot me a PM with the full address and I can do a manual quote and see if we can get the shipping cost lower than the normal quotes for you.

James

PM sent, thanks James

[CanadianF90M5]

Just ordered one ... will let you all know how the experience goes ... so far the order process / customer service with ESCTuning has been excellent