[Desking101]

Originally Posted by pbonsalb

The offset is different at 22 front versus 28 stock and 30 rear versus 28 stock for 20” wheels and the wheels are 1/2” wider. Together that may be enough. Half of the extra 12.7mm width will be on the outside. So front, the 6mm or 1/4 inch less offset pushes the wheel out and you have another 6mm wheel width on the outside. That is like a 12mm or 1/2” front spacer on a stock 20” wheel. Rear, you have more offset so the wheel would be 2mm further in but the extra 6mm wheel width on the outside counters that for a net gain to the outside of 4mm or about 3/16”.

Fronts should be ideal or very close. Rear you may want a small spacer but a hub extender should be used for anything more than a few mm (spacers need to be 10-12mm to support an integrated hub extender).

Add wider tires and half the width will also be on the outside.

I am not using spacers and don’t plan to. I have them and ran them on stock wheels and snow wheels. Once I go to wider tires, I think the TS5 will fit nicely.

You think stock lug bolts are fine on these wheels or is extended necessary?

[pbonsalb]

I have studs but stock lug bolts would be fine. Generally you need longer lug nuts only when running spacers.

[WheelsBoutique]

Originally Posted by Littierally

Any insight on how the brushed frozen champagne matches the CS bronze in person?

It'll never be a 100% match but it is very close. If I had to put a number on it I'd say 85% to 90% of the look.

[cibmax]

Originally Posted by Holset

Signature SV104 Black smoke tinted
Front 21x10 ET24 285/30/21 Michelin PS4S
Rear 21x11 ET27 295/30/21 Michelin PS4S

Love them!

what suspension set up?

[dcohen13]

Niche Forged Kanan 20x9.5 +20 squared
Xcomp HP 200TW 275/35/20 squared

[Holset]

Originally Posted by cibmax

what suspension set up?

Dinan Has

[Desking101]

Titan7 20" on Eibach Pro-Kit springs

[ResIpsaLoquitur]

Originally Posted by Desking101

Titan7 20" on Eibach Pro-Kit springs

Looking real good!

[NCRob]

Originally Posted by Desking101

Titan7 20" on Eibach Pro-Kit springs

Nice! If I recall you went with 285/295 35s? How are you liking the setup?

[Desking101]

Originally Posted by NCRob

Nice! If I recall you went with 285/295 35s? How are you liking the setup?

Yes that's the size. Perfect IMO. 305s wouldn't have looked right.

[NCRob]

Originally Posted by Desking101

Yes that's the size. Perfect IMO. 305s wouldn't have looked right.

Yeah, I think I’ve decided against 305s now too. I reached out to Titan and corresponded with someone who actually owns this car and they use 295s and obviously recommended those. Guess I’ll see if I need to keep my 5mm spacers or not when the time comes this spring.

Are you using any spacers?

[Desking101]

Originally Posted by NCRob

Yeah, I think I’ve decided against 305s now too. I reached out to Titan and corresponded with someone who actually owns this car and they use 295s and obviously recommended those. Guess I’ll see if I need to keep my 5mm spacers or not when the time comes this spring.

Are you using any spacers?

No spacers, the fitment is perfect

[crypto]

Oh damn I like those S101SC wheels on the CS and the Imola Red. Got me contemplating ordering but they are not cheap lol...

[dcohen13]

[QUOTE=Desking101;29674530]Titan7 20" on Eibach Pro-Kit springs

what are your wheel specs? No rubbing issues in rear with bumps?

[Desking101]

[QUOTE=dcohen13;29694555]

Originally Posted by Desking101

Titan7 20" on Eibach Pro-Kit springs

what are your wheel specs? No rubbing issues in rear with bumps?

20x10 +22 and 20x11 +30 no rubbing issues at all ever

[dcohen13]

[QUOTE=Desking101;29694759]

Originally Posted by dcohen13

20x10 +22 and 20x11 +30 no rubbing issues at all ever

thank you!

[916_M5]

Vision Forged Wheels
21x10.5 and 21x11.5

[cibmax]

Originally Posted by Holset

Dinan Has

Looks good! Is that the lowest setting? I'm assuming the front is all the way down, but what about the rear?

[markk22]

While this is not an aftermarket wheel, I thought it might have interest since it’s an m8 wheel.

[TFERG]

Anybody running 285/35x21 & 295/35x21 on stock suspension?

[M5VanHalen]

2023 M5 with 21" BBS Fi-R in Satin Black. Also, H&R lowering springs. I think the stance is perfect and rides like stock. Thanks to Supreme Power for the recommendation.

[josec70]

Originally Posted by M5VanHalen

2023 M5 with 21" BBS Fi-R in Satin Black. Also, H&R lowering springs. I think the stance is perfect and rides like stock. Thanks to Supreme Power for the recommendation.

Looks awesome!! Stance is 10/10.

HR or HR 550’s?