[GranitM5]

Originally Posted by TrevorM3

15 in front, dont do 12. wont come out far enough

Trevor would you happen to know if the car will rub with 15/12 and lowered on m550i springs?

[TrevorM3]

Originally Posted by GranitM5

Trevor would you happen to know if the car will rub with 15/12 and lowered on m550i springs?

it will not. My father has the exact same set up.



PM me your # if you want, i can send you some pics.

[r33_RGSport]

Originally Posted by GranitM5

Trevor would you happen to know if the car will rub with 15/12 and lowered on m550i springs?

It will not.
Done plenty of that setup.

[JBA87]

These are 12mm all around w h&5 m550i springs

[r33_RGSport]

Originally Posted by JBA87

These are 12mm all around w h&5 m550i springs

Looking good.

[dardeca]

Originally Posted by JBA87

These are 12mm all around w h&5 m550i springs

What happened to your side vent pieces for the front fenders?

[OT-Dan]

This is 10mm rear / 12mm front. The rears are basically flush and the front has a little overhang, like a 911 GT3

[mattympc]

I believe my rims are the 706m Bmw oem wheels, but I ordered 10mm macht schnell spacers and the hub is too big for my rim. How can I find out if the spacers I order will fit properly? Any advice appreciated

[sbilyayev]

Ordered 15f & 11b. Once I tried them on, decided that it was a bit to aggressive for me. Stuck 11s up front and it seem like a good fit.

I also attached the way 11s looked at the back.

Stock suspension

[jnotrom711]

15F/12R
stock suspension (for now, installing KW HAS next week)
'19 Comp

[Damzz]

Silly queen here - looking to purchase some spacers and wondering if there are any recommendations on which brand to get? I'd assume they're all the same. I saw Dinan is selling them for much cheaper than other sites(h&r), roughly $250 for 2 sets and lug nuts. What's the recommendation?

[pbonsalb]

Dinan was cheaper but out of stock do I bought H&R. Here is one of the sizes and go can search other H&R PN. https://m.eeuroparts.com/Parts/52497...rak-3055664SW/

[badeason]

Originally Posted by sbilyayev

Ordered 15f & 11b. Once I tried them on, decided that it was a bit to aggressive for me. Stuck 11s up front and it seem like a good fit.

I also attached the way 11s looked at the back.

Stock suspension

thats the look im after, inclusive of the bike rack - thanks for posting

[patrickkc]

Trying to decide if I want to go 12 mm or 13mm front.. Anybody with stock height / tires on 789M wheels with 12 or 13 front and 11 rear?

It seems 11 will stick out a little bit at the back.. ideally I don't want any sticking out but H&R doesn't make 10s unfortunately..

[Jking809]

I got 15mm spacers all around. Would that be an issue ? I'm not lowering the car just fyi

[pbonsalb]

15mm rear is just 3mm more than the 12mm that some use without issue and 4mm more than the 11mm that most agree presents no problem. 1mm is .040 inches so even 4mm more is just 0.16 inches. Not much. My best guess is that you might hear a rub on compression over a large dip in the road at high speed with 4-5 people in the car and a trunk full of luggage. If it’s usually just you, there will likely not be a problem. Let us know in a few months how it works.

[Jking809]

Originally Posted by pbonsalb

15mm rear is just 3mm more than the 12mm that some use without issue and 4mm more than the 11mm that most agree presents no problem. 1mm is .040 inches so even 4mm more is just 0.16 inches. Not much. My best guess is that you might hear a rub on compression over a large dip in the road at high speed with 4-5 people in the car and a trunk full of luggage. If it’s usually just you, there will likely not be a problem. Let us know in a few months how it works.

Originally Posted by pbonsalb

15mm rear is just 3mm more than the 12mm that some use without issue and 4mm more than the 11mm that most agree presents no problem. 1mm is .040 inches so even 4mm more is just 0.16 inches. Not much. My best guess is that you might hear a rub on compression over a large dip in the road at high speed with 4-5 people in the car and a trunk full of luggage. If it's usually just you, there will likely not be a problem. Let us know in a few months how it works.

Appreciated I had like this for over a year now and haven't had issues with it. I was told that is very aggressive. I will update the post if something happens

[aj_g80]

Originally Posted by Jking809

Appreciated I had like this for over a year now and haven't had issues with it. I was told that is very aggressive. I will update the post if something happens

do you have pics of the front with 15's?



lowering CS (car has pzero's) and i need to figure out setup. Will be lowered with h&r 550i kit.

[maximusppl]

I feel like my issue with spacers is the 5mm ones dont have the lip, so they dont sit as "flush" against the back of the wheel. Just had my rear tires replaces and the shop mentioned they had a hard time lining it back up in the rear. Thinking about just having the 12mm up front and taking the rear off unless I can find small ones for the rear that have the little lip.

[pbonsalb]

Small ones don’t have enough substance to support the lip. Supposedly 11 to 12mm in the minimum to have a lip. There are numerous reports of lips on 10mm spacers cracking. But there are hub extenders you can buy that take the place of the integrated lip and you use a flat spacer with those.

[Eljeffrey13]

I started with 12mm front and 5mm rear and car had minor shake at 100mph or higher, i just went to 15mm front and 10mm rear and shake went away and gave the car a really nice stance, i wouldnt go any bigger in rear

[Eljeffrey13]

15mm front 10mm rear… lowered on dinan adjustable springs