BMW Garage BMW Meets Register Search Today's Posts Mark Forums Read
BMW M5 F90 (2018+) General Forums Engine, Exhaust, Drivetrain, Tuning Modifications    NEW RELEASE: Dinan F90 M5 Cold Air Intake & Turbo Inlet Pipes

Post Reply
 
Thread Tools Search this Thread
      09-23-2021, 04:49 PM   #89
brad65ford
Captain
254
Rep
764
Posts

Drives: 2022 M3
Join Date: Oct 2015
Location: fl

iTrader: (0)

haven't driven it yet but the parts looks quality. Wishing Dinan offer a intake scoop as well separately similarly as AWE or Eventuri does. That is next on my list
Appreciate 0
      09-23-2021, 04:54 PM   #90
Dinan_Engineering
Brigadier General
Dinan_Engineering's Avatar
United_States
3896
Rep
3,124
Posts

Drives: Any BMW
Join Date: Jun 2013
Location: Opelika, AL

iTrader: (0)

Quote:
Originally Posted by brad65ford View Post
haven't driven it yet but the parts looks quality. Wishing Dinan offer a intake scoop as well separately similarly as AWE or Eventuri does. That is next on my list
Our intake scoop is part of the front section of the intake so I don't foresee a seperate piece developed.
Appreciate 0
      09-23-2021, 04:54 PM   #91
brad65ford
Captain
254
Rep
764
Posts

Drives: 2022 M3
Join Date: Oct 2015
Location: fl

iTrader: (0)

understood
Appreciate 0
      09-23-2021, 05:55 PM   #92
SGMM5
Private First Class
116
Rep
107
Posts

Drives: 2020 M5, 2001 Lexus IS300
Join Date: Feb 2021
Location: MD

iTrader: (1)

Only tip I'd add on the install is to watch the hose clamp on the left intercooler pipe. Mine was rotated a little counter clockwise from where it prob should be and it's really tight to the new inlet at that point. I had to rotate the clamp a little to keep it from hitting and scratching the new inlet.
Appreciate 0
      09-23-2021, 06:04 PM   #93
brad65ford
Captain
254
Rep
764
Posts

Drives: 2022 M3
Join Date: Oct 2015
Location: fl

iTrader: (0)

Really like the look, kind of OEM'ish.
Attached Images
 
Appreciate 0
      09-23-2021, 08:42 PM   #94
AngryInch
Lieutenant
212
Rep
548
Posts

Drives: 2021 BMW M5 Comp
Join Date: Jul 2021
Location: Canada

iTrader: (0)

How’s everyone figment over the turbo? Do you find them slightly looser than stock? I can rock mine from and back very slightly, curious if that is normal?
Appreciate 0
      09-23-2021, 08:43 PM   #95
brad65ford
Captain
254
Rep
764
Posts

Drives: 2022 M3
Join Date: Oct 2015
Location: fl

iTrader: (0)

My driver side was like that then I realized i forgot that 1 gasket to put on. Take off the side that is loose see if the gasket is still there.
Appreciate 0
      09-24-2021, 07:02 AM   #96
SGMM5
Private First Class
116
Rep
107
Posts

Drives: 2020 M5, 2001 Lexus IS300
Join Date: Feb 2021
Location: MD

iTrader: (1)

Mine are both pretty tight. Similar to the stock pieces. At first one wasn't fully seated cuz the clip wasn't all the way down. One of the "legs" wasn't in the slot.
Appreciate 0
      09-24-2021, 09:01 AM   #97
GTATX
Lieutenant Colonel
GTATX's Avatar
United_States
1104
Rep
1,607
Posts

Drives: 2020 M8 Comp First Edition
Join Date: Nov 2012
Location: Georgetown TX

iTrader: (0)

Garage List
Quote:
Originally Posted by brad65ford View Post
My driver side was like that then I realized i forgot that 1 gasket to put on. Take off the side that is loose see if the gasket is still there.
Now I need to check mine lol. I don't remember any gaskets. I thought all I had to do was add clips on top and that's it.

If anyone has pic of gasket that be great. Thx
__________________
GT
2020 BMW M8 Comp First Edition
2019 Panamera Turbo
2021 BMW X6M Comp
2019 BMW M5
2018 Maserati Ghibli SQ4 GranSport
Appreciate 0
      09-24-2021, 09:16 AM   #98
AngryInch
Lieutenant
212
Rep
548
Posts

Drives: 2021 BMW M5 Comp
Join Date: Jul 2021
Location: Canada

iTrader: (0)

Quote:
Originally Posted by GTATX View Post
Now I need to check mine lol. I don't remember any gaskets. I thought all I had to do was add clips on top and that's it.

If anyone has pic of gasket that be great. Thx
You better do that right away, you are likely sucking in dust.. the gaskets are in the stock pieces, you pull them out and insert into the depression inside the new inlets. Those gaskets seal the inlets to the turbo housing and are pretty critical.
Appreciate 0
      09-24-2021, 09:54 AM   #99
GTATX
Lieutenant Colonel
GTATX's Avatar
United_States
1104
Rep
1,607
Posts

Drives: 2020 M8 Comp First Edition
Join Date: Nov 2012
Location: Georgetown TX

iTrader: (0)

Garage List
Quote:
Originally Posted by AngryInch View Post
Quote:
Originally Posted by GTATX View Post
Now I need to check mine lol. I don't remember any gaskets. I thought all I had to do was add clips on top and that's it.

If anyone has pic of gasket that be great. Thx
You better do that right away, you are likely sucking in dust.. the gaskets are in the stock pieces, you pull them out and insert into the depression inside the new inlets. Those gaskets seal the inlets to the turbo housing and are pretty critical.
Got it I'll get it done today.
__________________
GT
2020 BMW M8 Comp First Edition
2019 Panamera Turbo
2021 BMW X6M Comp
2019 BMW M5
2018 Maserati Ghibli SQ4 GranSport
Appreciate 0
      09-24-2021, 09:56 AM   #100
Dinan_Engineering
Brigadier General
Dinan_Engineering's Avatar
United_States
3896
Rep
3,124
Posts

Drives: Any BMW
Join Date: Jun 2013
Location: Opelika, AL

iTrader: (0)

Quote:
Originally Posted by GTATX View Post
Now I need to check mine lol. I don't remember any gaskets. I thought all I had to do was add clips on top and that's it.

If anyone has pic of gasket that be great. Thx
Gasket in question is pictured on page 6 of the installation manual linked a couple posts back. It's the reddish O-ring looking things.
Appreciate 0
      09-24-2021, 09:58 AM   #101
GTATX
Lieutenant Colonel
GTATX's Avatar
United_States
1104
Rep
1,607
Posts

Drives: 2020 M8 Comp First Edition
Join Date: Nov 2012
Location: Georgetown TX

iTrader: (0)

Garage List
Quote:
Originally Posted by Dinan_Engineering View Post
Quote:
Originally Posted by GTATX View Post
Now I need to check mine lol. I don't remember any gaskets. I thought all I had to do was add clips on top and that's it.

If anyone has pic of gasket that be great. Thx
Gasket in question is pictured on page 6 of the installation manual linked a couple posts back. It's the reddish O-ring looking things.
My bad oversight on my part. I'll get it done today
__________________
GT
2020 BMW M8 Comp First Edition
2019 Panamera Turbo
2021 BMW X6M Comp
2019 BMW M5
2018 Maserati Ghibli SQ4 GranSport
Appreciate 0
      09-24-2021, 04:20 PM   #102
GTATX
Lieutenant Colonel
GTATX's Avatar
United_States
1104
Rep
1,607
Posts

Drives: 2020 M8 Comp First Edition
Join Date: Nov 2012
Location: Georgetown TX

iTrader: (0)

Garage List
Quote:
Originally Posted by Dinan_Engineering View Post
Quote:
Originally Posted by GTATX View Post
Now I need to check mine lol. I don't remember any gaskets. I thought all I had to do was add clips on top and that's it.

If anyone has pic of gasket that be great. Thx
Gasket in question is pictured on page 6 of the installation manual linked a couple posts back. It's the reddish O-ring looking things.
So i was able to add the gasket and everything clipped fine but Inlet still doesn't sit flush specially on driver's side. There is a little space in between. Can someone share their pic please. Thanks

I'll add mine as well.
__________________
GT
2020 BMW M8 Comp First Edition
2019 Panamera Turbo
2021 BMW X6M Comp
2019 BMW M5
2018 Maserati Ghibli SQ4 GranSport
Appreciate 0
      09-24-2021, 04:25 PM   #103
brad65ford
Captain
254
Rep
764
Posts

Drives: 2022 M3
Join Date: Oct 2015
Location: fl

iTrader: (0)

Quote:
Originally Posted by GTATX View Post
So i was able to add the gasket and everything clipped fine but Inlet still doesn't sit flush specially on driver's side. There is a little space in between. Can someone share their pic please. Thanks

I'll add mine as well.
Mine doesn't go all the way back as well but it clips in so not worried. BTW glad i mentioned the seal
Appreciate 1
GTATX1104.00
      09-24-2021, 04:50 PM   #104
GTATX
Lieutenant Colonel
GTATX's Avatar
United_States
1104
Rep
1,607
Posts

Drives: 2020 M8 Comp First Edition
Join Date: Nov 2012
Location: Georgetown TX

iTrader: (0)

Garage List
Quote:
Originally Posted by brad65ford View Post
Quote:
Originally Posted by GTATX View Post
So i was able to add the gasket and everything clipped fine but Inlet still doesn't sit flush specially on driver's side. There is a little space in between. Can someone share their pic please. Thanks

I'll add mine as well.
Mine doesn't go all the way back as well but it clips in so not worried. BTW glad i mentioned the seal
Thanks a lot bud if it wasn't for u I thought I was good to go lol but no harm done. Just did a 10.24 at 139mph almost 2500 DA and 75.F lol
__________________
GT
2020 BMW M8 Comp First Edition
2019 Panamera Turbo
2021 BMW X6M Comp
2019 BMW M5
2018 Maserati Ghibli SQ4 GranSport
Appreciate 1
Mcc420473.50
      09-24-2021, 08:00 PM   #105
DrivenAgain
MFJWADE
119
Rep
351
Posts

Drives: 2018 BMW M5
Join Date: Dec 2020
Location: MD

iTrader: (0)

Quote:
Originally Posted by GTATX View Post
Quote:
Originally Posted by brad65ford View Post
Quote:
Originally Posted by GTATX View Post
So i was able to add the gasket and everything clipped fine but Inlet still doesn't sit flush specially on driver's side. There is a little space in between. Can someone share their pic please. Thanks

I'll add mine as well.
Mine doesn't go all the way back as well but it clips in so not worried. BTW glad i mentioned the seal
Thanks a lot bud if it wasn't for u I thought I was good to go lol but no harm done. Just did a 10.24 at 139mph almost 2500 DA and 75.F lol
That trap is 🍌 fast!! Do you launch in 4wd or 4wdSport?
__________________
2018 M5 Singapore Grey CCBs/Utku Noa E45 ECU/xHP TCU/PG-Intake/PG-Lower Downpipes
Appreciate 0
      09-24-2021, 08:08 PM   #106
AngryInch
Lieutenant
212
Rep
548
Posts

Drives: 2021 BMW M5 Comp
Join Date: Jul 2021
Location: Canada

iTrader: (0)

Quote:
Originally Posted by GTATX View Post
Thanks a lot bud if it wasn't for u I thought I was good to go lol but no harm done. Just did a 10.24 at 139mph almost 2500 DA and 75.F lol
I wish!! What’s your mods? I can’t get above 133mph fml.


Can you post a log and time slip?? I want to see your timing.
Appreciate 0
      09-24-2021, 08:14 PM   #107
GTATX
Lieutenant Colonel
GTATX's Avatar
United_States
1104
Rep
1,607
Posts

Drives: 2020 M8 Comp First Edition
Join Date: Nov 2012
Location: Georgetown TX

iTrader: (0)

Garage List
Quote:
Originally Posted by DrivenAgain View Post
Quote:
Originally Posted by GTATX View Post
Quote:
Originally Posted by brad65ford View Post
Quote:
Originally Posted by GTATX View Post
So i was able to add the gasket and everything clipped fine but Inlet still doesn't sit flush specially on driver's side. There is a little space in between. Can someone share their pic please. Thanks

I'll add mine as well.
Mine doesn't go all the way back as well but it clips in so not worried. BTW glad i mentioned the seal
Thanks a lot bud if it wasn't for u I thought I was good to go lol but no harm done. Just did a 10.24 at 139mph almost 2500 DA and 75.F lol
That trap is 🍌 fast!! Do you launch in 4wd or 4wdSport?
4WD
__________________
GT
2020 BMW M8 Comp First Edition
2019 Panamera Turbo
2021 BMW X6M Comp
2019 BMW M5
2018 Maserati Ghibli SQ4 GranSport
Appreciate 0
      09-24-2021, 08:41 PM   #108
brad65ford
Captain
254
Rep
764
Posts

Drives: 2022 M3
Join Date: Oct 2015
Location: fl

iTrader: (0)

Quote:
Originally Posted by GTATX View Post
4WD
Interesting, i've never run in 4wd mode.
Appreciate 0
      09-24-2021, 08:44 PM   #109
GTATX
Lieutenant Colonel
GTATX's Avatar
United_States
1104
Rep
1,607
Posts

Drives: 2020 M8 Comp First Edition
Join Date: Nov 2012
Location: Georgetown TX

iTrader: (0)

Garage List
Quote:
Originally Posted by brad65ford View Post
Quote:
Originally Posted by GTATX View Post
4WD
Interesting, i've never run in 4wd mode.
How do u launch then?

I thought LC minimum requirements are:

Engine Sport Plus
Transmission S3
Dsc off
4WD

Rest I keep suspension condor
Steering sport plus

Both those parameters don't matter
__________________
GT
2020 BMW M8 Comp First Edition
2019 Panamera Turbo
2021 BMW X6M Comp
2019 BMW M5
2018 Maserati Ghibli SQ4 GranSport
Appreciate 0
      09-24-2021, 08:50 PM   #110
GTATX
Lieutenant Colonel
GTATX's Avatar
United_States
1104
Rep
1,607
Posts

Drives: 2020 M8 Comp First Edition
Join Date: Nov 2012
Location: Georgetown TX

iTrader: (0)

Garage List
Quote:
Originally Posted by AngryInch View Post
Quote:
Originally Posted by GTATX View Post
Thanks a lot bud if it wasn't for u I thought I was good to go lol but no harm done. Just did a 10.24 at 139mph almost 2500 DA and 75.F lol
I wish!! What's your mods? I can't get above 133mph fml.


Can you post a log and time slip?? I want to see your timing.
My mod list is as follows:

Evolve utkunoa
Custom E30 Meth Stage 2
TCU Custom Stage 3 utkunoa

Keller 3inch downpipes
Remus cat-back
Dinan intake and inlet
Autotechnik Front air scoop
Snow performance stage 3
70/30 meth mix
RK Meth Adapters

90C thermostat
Redline 5W50 Motor Oil
NGK 2 Step colder plugs

BBS Fi-R 21inch with 285 Fr- 295 Rr

H&R M550i springs

JB4 for just data and logging.
__________________
GT
2020 BMW M8 Comp First Edition
2019 Panamera Turbo
2021 BMW X6M Comp
2019 BMW M5
2018 Maserati Ghibli SQ4 GranSport
Appreciate 0
Post Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 05:51 AM.




m5post
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST