[ambletx]

• M5 CS - 627 HP, 4096 lbs

• M5 Comp - 617 HP, 4243 lbs (w/ RC GTS: manufacture claims +121 hp/+164 lb-ft; realistically more like 75’ish to hp/lb-ft)

Given that ^^, something else is up. I have a hard time believing that 10 hp and -230 lbs puts the CS in the same bracket as the Comp w/ the above mods. The Comp should walk the CS both from a dig and roll. Maybe I’m missing something here and need to look for some dragy numbers for a CS.

[Day Laborer]

Baseline was 656 PS /816 NM (647 HP/ 601.85 ft)

After intakes and intercoolers was 667/840 NM (658 HP/ 619.55 ft·lb)

I didn't see that if it was tuned in the video and also dont know if the the method of dyno measuring.

Anyone here can translate a summary?

[jnotrom711]

Originally Posted by ambletx

• M5 CS - 627 HP, 4096 lbs

• M5 Comp - 617 HP, 4243 lbs (w/ RC GTS: manufacture claims +121 hp/+164 lb-ft; realistically more like 75’ish to hp/lb-ft)

Given that ^^, something else is up. I have a hard time believing that 10 hp and -230 lbs puts the CS in the same bracket as the Comp w/ the above mods. The Comp should walk the CS both from a dig and roll. Maybe I’m missing something here and need to look for some dragy numbers for a CS.

We were never able to get at it from a dig/stop, and we didn't really get too much space for great run, but there was some pull away on a couple of the runs. Now if we were in different gears or not, I don't know. But wasn't very scientific runs.