11-04-2019, 11:41 PM | #1 |
Captain
575
Rep 754
Posts |
Heads up display reset
Everytime I get into my car I use the same key and it recognizes me as saved driver number 1. However, I always have to change the heads up display to "M Mode" as it wont keep the setting from the previous time.
Does anyone else have this issue or is this how it was intended?
__________________
DME: 1848 DA 0-60 2.42 -- 1/8 Mile 6.38 -- 1/4 Mile 9.89 -- 60-130 5.91
Evolve: 1418 DA 0-60 2.48 -- 1/8 Mile 6.47 -- 1/4 Mile 10.05 -- 60-130 6.48 JB4: 1096 DA 0-60 2.54 -- 1/8 Mile 6.50 -- 1/4 Mile 10.05 -- 60-130 6.18 IG: @hockeytyme All runs on street with no prep on 21 inch wheels and PS4S tires |
11-04-2019, 11:44 PM | #2 | |
Grand Duke
1540
Rep 1,114
Posts
Drives: 2023 M4CSL
Join Date: Dec 2015
Location: NorCal
|
Quote:
__________________
2023 M4CSL
2005 Lotus Elise |
|
Appreciate
1
Hockeytyme575.00 |
11-04-2019, 11:55 PM | #3 |
Captain
575
Rep 754
Posts |
Wow, that is lame. I was really hoping I was doing something wrong. I really like having M Mode up there and really don't want to have to dial in the setting every time I get in the car, and I can't remember if it will stick even on M1 or M2?
__________________
DME: 1848 DA 0-60 2.42 -- 1/8 Mile 6.38 -- 1/4 Mile 9.89 -- 60-130 5.91
Evolve: 1418 DA 0-60 2.48 -- 1/8 Mile 6.47 -- 1/4 Mile 10.05 -- 60-130 6.48 JB4: 1096 DA 0-60 2.54 -- 1/8 Mile 6.50 -- 1/4 Mile 10.05 -- 60-130 6.18 IG: @hockeytyme All runs on street with no prep on 21 inch wheels and PS4S tires |
Appreciate
0
|
11-05-2019, 03:16 AM | #4 |
Private
21
Rep 70
Posts |
Try to use bimmercode to code it, it can save driving mode on default.
|
Appreciate
1
Hockeytyme575.00 |
11-18-2019, 09:16 AM | #5 |
First Lieutenant
268
Rep 380
Posts |
I have the M-mode tach bar on the HUD on both M1 and M2 setting - I programmed it in on the M settings screen once back over 3 months ago and everytime I double click M1 or M2 they are still up there. You should be able to set up the default start-up HUD as well if I'm not mistaken by going into the vehicle sub-menus. I left my default start screen clear of it though because I found that in poor visibility (heavy rain / fog at night ) the tach bar added too much light to the HUD and it impaired sight lines too much. Maybe its just my 50+ year old eyes.
|
Appreciate
0
|
11-18-2019, 09:54 AM | #6 | |
First Lieutenant
268
Rep 380
Posts |
Quote:
|
|
Appreciate
0
|
12-05-2019, 06:51 PM | #7 | ||
New Member
5
Rep 11
Posts |
Quote:
|
||
Appreciate
0
|
12-12-2019, 02:47 AM | #8 |
Lieutenant Colonel
369
Rep 1,887
Posts
Drives: '20 M5C, '09 M3 DCT Coupe
Join Date: Apr 2008
Location: Eastern Oregon... They call 'em rigs here
|
Nope. Still goes to standard view upon startup. Or going back to default from M1 or M2. Either way, saving seat settings didn't change anything. I just tried it.
__________________
M5C 20% tint, Xpel full front, partial sides and rear. Spacers, 15mm front, 12mm rear. Turner Motorsport Oil Cooler Guard.
M3: Active Autowerke filter, Dinan underdrive pulley, Dinan full exhaust and software, 3.45 Differential, Springs, Brakes, Dinan/HRE wheels, 275/30-19 w/10mm spacer, 295/30-19 w/3mm spacer, painted front reflectors, 30% tint, Escort 8500i & Lidar Jammer, LUX H8 V5 halos, Euro rear foglights, 3M ClearBra. |
Appreciate
0
|
12-19-2019, 03:06 AM | #9 |
Lieutenant
94
Rep 419
Posts
Drives: 2019 F90 M5B, 2006 E60 550i
Join Date: May 2019
Location: Orlando
|
I have my M1 button to set the HUD as desired plus Engine / Steering / etc setting. Immediately upon engine start, I press M1 and everything’s is set appropriately.
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|