08-09-2019, 05:29 PM | #1 |
Enlisted Member
20
Rep 38
Posts |
P10EA fault code
I just got this CEL fault code yesterday. It's for an ambient temperature sensor that i think is in the front bumper somewhere.
Anyway's, I've put an Akra catted DP and their exhaust on a few weeks ago and initially thought it was something to do with that. Question is, I had to mess around with one of the wiring harness's in the trunk while i was hooking up the controls for the Exhaust valves. Anyone have any idea if that sensor get's wired through the trunk area? I didn't have to cut any wires or anything but i had to loosen the wiring harness and pull a couple of wires apart gingerly to fit them into the control box. I'm wondering if i put the wrong set of wires through and somehow it's throwing off that sensor if it does get routed into the back. I haven't tried to use button to open/close the valves and have just been letting the sport settings do it automatically. |
02-09-2020, 08:29 PM | #2 | |
New Member
6
Rep 22
Posts |
I got the same error, they tried to fix it and they said they have to replace the instrument cluster. After 3 months later it came back and I have a feeling it is a design issue. Bringing my car in on Wed and maybe will give an update here.
Quote:
|
|
Appreciate
1
m2_Legend0.00 |
Post Reply |
Bookmarks |
|
|