[StealthM5]

After contemplating various tunes and seeing the Carbahn M8 and speaking with Chris at Carbahn, I decided on a stage 2 tune. I used Motor Works West in Wyckoff, NJ. I spoke with the owner Steve, who made me very comfortable with the build, as he had done a similar build for himself. I got an extended warranty through Carbahn for peace of mind and for resale.

Since my car is a '21, the DMEs had to be sent to Femto in Finland to be unlocked. While the DMEs were out, the other work was completed, which includes:

- 2 x 3.5bar MAP sensors
- 1 x Lightweight Carbahn Heat Exchanger
- 2 x CSF Intercoolers
- 2 x CarBahn High flow air filters

Just over two weeks later, I picked up the car and the initial impression from the seat-of-the-pants drive home is that the car feels incredible. I didn't really get to open the beast up during rush hour traffic and the biblical rain we have received in the northeast during the past week hasn't helped. I just got some race fuel and look forward to posting draggy and dyno results soon.

Below is a teaser of the build:

https://www.youtube.com/watch?v=SS2lwNUhXs0

Specs of the tune from the Carbahn’s site.

Stock- 93 Octane
Stock Wheel HP & TQ: 587 WHP & 565 lb-ft WTQ
Stock Flywheel HP & TQ: 716 HP & 689 lb-ft TQ
Tuned- 93 Octane
Tuned Wheel HP & TQ: 676 WHP & 639 lb-ft WTQ
Tuned Flywheel HP & TQ: 824 HP & 779 lb-ft TQ
Delta Wheel HP & TQ: 89 WHP 74 lb-ft WTQ
Delta Flywheel HP & TQ: 109 HP & 90 lb-ft TQ
Tuned- 100 Octane
Tuned Wheel HP & TQ: 723 WHP & 652 lb-ft WTQ
Tuned Flywheel HP & TQ: 882 HP & 795 lb-ft TQ
Specs on the tune from Carbahn’s site

[csayad]

How much did you pay? I’m curious!

[VT3M33]

solid setup! ran a 5.9sec 60-130 with mine, cheers and good luck