[M5FirstEdition]

Originally Posted by TheNine90

3530 LaMaster1 > LUT_FLC_FORWARDLIGHTING_Y > 00, 00, 00
3530 LaMaster1 > C_FLC_ENA > 01
3531 LaMaster2 > c_AFS_ENA > 01
3532 LaMaster3 > c_HBA_ENA > 01
3532 LaMaster3 > c_HBA_GFHB_ENA > 01

I don't see 00,00,00 under the LUT_FLC_FORWARDLIGHTING_Y line. Here is a screenshot
Am I missing something here?

[TheNine90]

3530 LaMaster1 > LUT_FLC_FORWARDLIGHTING_Y > 0x00, 0x00, 0x00
3530 LaMaster1 > C_FLC_ENA > 0x01
3531 LaMaster2 > c_AFS_ENA > 0x01
3532 LaMaster3 > c_HBA_ENA > 0x01
3532 LaMaster3 > c_HBA_GFHB_ENA > 0x01

[micvite]

Originally Posted by M5FirstEdition

I don't see 00,00,00 under the LUT_FLC_FORWARDLIGHTING_Y line. Here is a screenshot
Am I missing something here?

Just change it to g30 afs

[CrashCade]

I am brain farting on the technical name in coding. But have you deleted the vld coding from the build codes?

I’ll have to look back through my messages with BimmerGeeks, but I am pretty sure it was super straight forward in the F90. Once I removed the 5AP from the VO it determined it needed to code 3 modules and did everything automatically.

Edited: Just went through my messages. From BimmerGeeks on 8/22/2022: you should just have to remove 5AP and 8S4 from the VO. Make sure you are on the latest build which is beta build 2.51.3.

[M5FirstEdition]

Originally Posted by CrashCade

I am brain farting on the technical name in coding. But have you deleted the vld coding from the build codes?

I’ll have to look back through my messages with BimmerGeeks, but I am pretty sure it was super straight forward in the F90.

No haven't changed anything at all. The screenshots I shared is the only thing I see.

[CrashCade]

Originally Posted by M5FirstEdition

No haven't changed anything at all. The screenshots I shared is the only thing I see.

I updated my last post. If removing 5AP from the VO doesn’t work. Message them on FB messenger. They have great customer service.

[micvite]

Originally Posted by CrashCade

I am brain farting on the technical name in coding. But have you deleted the vld coding from the build codes?

I’ll have to look back through my messages with BimmerGeeks, but I am pretty sure it was super straight forward in the F90. Once I removed the 5AP from the VO it determined it needed to code 3 modules and did everything automatically.

Edited: Just went through my messages. From BimmerGeeks on 8/22/2022: you should just have to remove 5AP and 8S4 from the VO. Make sure you are on the latest build which is beta build 2.51.3.

Here's the funny thing though, if you do it that way (unless they've fixed it recently since I've told them this) the 3 modules it claims it coded? Well it didn't actually do the coding. When you go in to manually check the settings, nothing has changed so you don't get full functionality (still works just not as intended and you'd never notice if you've never driven a European car and seen how it's supposed to work) another issue is the values aren't properly mapped so a lot of differences between an eu spec cars coding and a us cars coding that you can't change because you have no idea what you're actually looking at. (I went to Germany, I ripped coding from 2 German spec cars, compared the coding to us spec cars and there are values that are named "undetermined" that are different. Who knows what they do, I sure don't and sadly we'll probably never find out. All we can do is hope bmw does a retrofit like they did in Canada.

[Jambo1]

Micvite, agreed, and you’re right. Two years ago, Almaretto had coded my car. All was great. I didn’t pick up on it, but the anti dazzle feature disappeared (for whatever reason) as I hadn’t done much nighttime driving.

Fast forward to the present time, I had noticed that I hadn’t seen this feature in action in a long time. So I coded it as per the info on this thread using Bimmercode. The anti dazzle appears to work (blue light comes on and all), but it is NOT the same - the individual LEDs do not light up or go off as intended by the true feature. The blue light goes on and off, but it’s more like haphazard changes in light throw.

[M5FirstEdition]

Originally Posted by micvite

Here's the funny thing though, if you do it that way (unless they've fixed it recently since I've told them this) the 3 modules it claims it coded? Well it didn't actually do the coding. When you go in to manually check the settings, nothing has changed so you don't get full functionality (still works just not as intended and you'd never notice if you've never driven a European car and seen how it's supposed to work) another issue is the values aren't properly mapped so a lot of differences between an eu spec cars coding and a us cars coding that you can't change because you have no idea what you're actually looking at. (I went to Germany, I ripped coding from 2 German spec cars, compared the coding to us spec cars and there are values that are named "undetermined" that are different. Who knows what they do, I sure don't and sadly we'll probably never find out. All we can do is hope bmw does a retrofit like they did in Canada.

My F90 is a Canadian car, how do I get that retrofit you referred to?

[micvite]

Originally Posted by M5FirstEdition

My F90 is a Canadian car, how do I get that retrofit you referred to?

Go to dealership and tell them to enable to feature from what I remember reading in a few places. Can't find the articles anymore so not sure I'd anything changed but worth a try.

[Maverik259]

Originally Posted by M5FirstEdition

I don't see 00,00,00 under the LUT_FLC_FORWARDLIGHTING_Y line. Here is a screenshot
Am I missing something here?

G030 x AFS

0x00, 0x00, 0x00 => 00, 00, 00

[CrashCade]

Originally Posted by micvite

Here's the funny thing though, if you do it that way (unless they've fixed it recently since I've told them this) the 3 modules it claims it coded? Well it didn't actually do the coding. When you go in to manually check the settings, nothing has changed so you don't get full functionality (still works just not as intended and you'd never notice if you've never driven a European car and seen how it's supposed to work) another issue is the values aren't properly mapped so a lot of differences between an eu spec cars coding and a us cars coding that you can't change because you have no idea what you're actually looking at. (I went to Germany, I ripped coding from 2 German spec cars, compared the coding to us spec cars and there are values that are named "undetermined" that are different. Who knows what they do, I sure don't and sadly we'll probably never find out. All we can do is hope bmw does a retrofit like they did in Canada.

Mine is pre LCI. I am 99.9% certain that my lights function as intended. Based of a few videos as well as it reaponding the same way my other BMWs have worked.

[M5FirstEdition]

Originally Posted by CrashCade

Mine is pre LCI. I am 99.9% certain that my lights function as intended. Based of a few videos as well as it reaponding the same way my other BMWs have worked.

Based on which coding instructions?

[M5FirstEdition]

Originally Posted by Maverik259

G030 x AFS

0x00, 0x00, 0x00 => 00, 00, 00

Here is an update.
I tried to follow you that and when o changed to the value above, it won't allow me to save and then code it. Here is a Pic.