09-01-2022, 04:06 PM | #1 |
Private First Class
31
Rep 137
Posts |
Handling with 295/285 tires?
What's up everyone.
Thinking of going 295r/285f. Anyone feel a difference in handling with that set up ? Thanks!
__________________
~Mamba Mentality~ 8/24
|
09-01-2022, 07:25 PM | #2 |
Private First Class
88
Rep 164
Posts |
|
Appreciate
0
|
09-02-2022, 03:59 AM | #3 |
Lieutenant Colonel
982
Rep 1,797
Posts |
|
Appreciate
0
|
09-02-2022, 06:14 AM | #4 |
Captain
608
Rep 747
Posts |
Yes, why?
I’m thinking of getting some Titan wheels that seem to be fairly popular for this model and they suggest that same setup. So curious too what adverse effect it has? Obviously BMW designed the car around a specific size for a reason, so not surprised changing that does have some consequences but really curious of what they are and how much? |
Appreciate
0
|
09-02-2022, 07:01 AM | #5 | |
Lieutenant Colonel
982
Rep 1,797
Posts |
Quote:
|
|
Appreciate
0
|
09-04-2022, 09:40 AM | #7 |
Private First Class
106
Rep 180
Posts |
Unless you’re getting a wider wheel, changing stock tire on stock wheel from 285 to 295 will have zero effect in handling because all you will do is raise the sidewall a bit and might even reduce handling in that case. You want more grip get a wider wheel with wider tire.
|
Appreciate
1
bimmerbeast988.00 |
09-04-2022, 10:03 AM | #8 | |
Private First Class
31
Rep 137
Posts |
Quote:
I put spacers on and it decreases handling as well. Trying to find a solution to fill the wheel well without loosing the remarkable handling the new comps provide. Not planning on lowering the car either. This is my daily and I live in jersey. Jersey roads are horrible.
__________________
~Mamba Mentality~ 8/24
|
|
Appreciate
0
|
09-04-2022, 10:38 AM | #10 |
Lieutenant General
5234
Rep 10,616
Posts |
295/35 is like reducing the diff from 3.15 to 3.12 and 305/35 is like going from 3.15 to 3.09. Normally for performance you would want the opposite — a shorter (higher numerical) rather than a longer diff. But with the torque these motors make, especially when tuned, I doubt there would be much difference in acceleration. Have not seen any testing results.
|
Appreciate
0
|
09-04-2022, 07:33 PM | #11 |
Second Lieutenant
228
Rep 298
Posts |
step up to bigger rims to help a bit with handling, if you don't want to lower your car.
Generally the bigger the rim, the thinner the rubber, the better the handling. Also dinan suspension parts seemed to have good reviews about them. monoball. stronger bushings, etc. |
Appreciate
0
|
09-04-2022, 11:04 PM | #12 |
Major General
4140
Rep 7,160
Posts
Drives: F90 M5 / F15 50i
Join Date: Jun 2017
Location: Virginia
|
I'm running 285/295 on the new 789m I picked up. Love them way more than stock size. They fill the gap much better, provide more cushion, and protect the rim lip even more so.
You won't feel any change in handling and I wouldn't go to 305s as I've heard they rub under load by those who have run them and swapped back.
__________________
'07 Yamaha R1 (sold)
'06 C55 AMG (sold) ‘?20 M5, MP Carbon Pro Spoiler, MP Carbon Diffuser, MP Black grille and gills, MP Carbon Mirrors, CF side sills, 789M w/ Ti studs, eventuri, Dinan X pipe '14 X5 50i (wife’s now) |
Appreciate
1
MaulerZ43.50 |
09-05-2022, 06:38 AM | #13 | |
Captain
608
Rep 747
Posts |
Quote:
|
|
Appreciate
0
|
09-05-2022, 08:11 PM | #14 | |
Private First Class
31
Rep 137
Posts |
Quote:
Do you feel a difference in acceleration?
__________________
~Mamba Mentality~ 8/24
|
|
Appreciate
0
|
09-06-2022, 05:30 AM | #15 | |
Private First Class
41
Rep 131
Posts |
Quote:
|
|
Appreciate
0
|
09-06-2022, 05:32 AM | #16 | ||
Private First Class
41
Rep 131
Posts |
Quote:
|
||
Appreciate
0
|
09-06-2022, 08:56 AM | #17 |
Private First Class
294
Rep 195
Posts |
The only difference that I've felt is improved off the line traction. I'm running 285/35r20 and 295/35r20 Pilot Sport Cup 2 (240). The draggy below is an unprepped surface.
|
Appreciate
0
|
09-06-2022, 02:06 PM | #18 | |
Private First Class
31
Rep 137
Posts |
Quote:
Any difference in handling ?
__________________
~Mamba Mentality~ 8/24
|
|
Appreciate
0
|
09-06-2022, 02:11 PM | #19 | |||
Private First Class
31
Rep 137
Posts |
Quote:
I just picked up a 2021 comp and I put 15f/12r spacers and I'm experiencing loss of traction cornering aggressively and vibration after 85mph. Want to find a solution to fill the wheel well without loosing performance around turns and obviously no vibration at high speed. Wondering if this is a alignment or balancing issue.
__________________
~Mamba Mentality~ 8/24
|
|||
Appreciate
0
|
09-06-2022, 04:36 PM | #20 | |
Private First Class
88
Rep 164
Posts |
Quote:
no worries though because I'm getting wheels soon |
|
Appreciate
0
|
09-06-2022, 04:45 PM | #21 | ||
Private First Class
31
Rep 137
Posts |
Quote:
You think its an installation issue ?
__________________
~Mamba Mentality~ 8/24
|
||
Appreciate
0
|
09-06-2022, 04:49 PM | #22 |
Lieutenant General
5234
Rep 10,616
Posts |
I have tested H&R 12/15 up to an indicated 164 mph without issue. Did you clean your hub surfaces? I periodically clean mine with a razor blade scraper.
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|