02-02-2024, 12:45 PM | #1 |
Major
640
Rep 1,381
Posts |
FF550 Flow Forged 20" Wheels - £700
Okay time to stop hoarding wheels 😂 I have a brand new set of FF550 20 inch flow forged alloy wheels finished in satin metallic gun metal grey - £700 cash/bank transfer collected near York, I can however meet if you’re local. Delivery is fine but you must arrange at your own expense and risk.
Never fitted or used before, however when I bought them the grey paint on 1 of the wheels was slightly different due to batch variation, to make them all equal I had all 4 re-powder coated by Raw Wheels in York who did a first class job. Wheel specs: Fronts = 8.5j ET 35 x 20” / 5x120 Rears = 9j ET35 x 20” / 5x120 I originally bought them from Elegance Wheels in Germany, however they are officially made by AVA Wheels for Elegance as an exclusive. I paid £1600 plus an eye watering £500 import duty. I’m not one for aftermarket wheels, I tend to lean more towards OEM+ but these were enough to convince me to part with my old M Performance alloys back in 2021. They get a whole bunch of compliments due to their design and concavity which sets off the car nicely - I also believe AVA have stopped producing these wheels now, when I looked a third set nobody had any to sell me. Please be aware that the photos of my car are for demo purposes - the four that are for sale are the same design and size, I just have my own set.
__________________
2015 435i - 401whp
Scorpion catless dp, VRSF 6.5" HD FMIC, MST V2 inlet, NGK 97506, MHD Stage 2+ 102, xHP Stage 3, M Performance Exhaust (modified for valved straight thru) |
02-02-2024, 05:28 PM | #3 |
Major
640
Rep 1,381
Posts |
I run a 235/35/20 up front and 275/30/20 in the rear but my own set use a 10j rear, in hindsight I should have gone for a 285/30 in the rear though as they look a tiny bit stretched, especially with the 30 profile sidewall.
Bought the 9j for cheaper winter tyres but never got around to needing them. Right now I have a guy who's supposedly sending me a deposit to hold them, I'll update this thread as to where things stand once I have an update.
__________________
2015 435i - 401whp
Scorpion catless dp, VRSF 6.5" HD FMIC, MST V2 inlet, NGK 97506, MHD Stage 2+ 102, xHP Stage 3, M Performance Exhaust (modified for valved straight thru) |
Appreciate
0
|
02-05-2024, 08:50 AM | #4 |
Major
640
Rep 1,381
Posts |
aaand they're back for sale again, buyer backed out after apparently writing his car off
__________________
2015 435i - 401whp
Scorpion catless dp, VRSF 6.5" HD FMIC, MST V2 inlet, NGK 97506, MHD Stage 2+ 102, xHP Stage 3, M Performance Exhaust (modified for valved straight thru) |
Appreciate
0
|
02-15-2024, 03:47 PM | #5 |
Major
640
Rep 1,381
Posts |
Dropping these to £650, had a lot of people trying their luck to knock £££ off so I won't be entertaining anymore crazy offers.
__________________
2015 435i - 401whp
Scorpion catless dp, VRSF 6.5" HD FMIC, MST V2 inlet, NGK 97506, MHD Stage 2+ 102, xHP Stage 3, M Performance Exhaust (modified for valved straight thru) |
Appreciate
0
|
03-04-2024, 02:24 PM | #6 |
Major
640
Rep 1,381
Posts |
Dropping these to £625, they're really beginning to take up room now so I ideally need them gone
__________________
2015 435i - 401whp
Scorpion catless dp, VRSF 6.5" HD FMIC, MST V2 inlet, NGK 97506, MHD Stage 2+ 102, xHP Stage 3, M Performance Exhaust (modified for valved straight thru) |
Appreciate
0
|
03-16-2024, 12:53 PM | #7 |
Major
640
Rep 1,381
Posts |
Sold.
__________________
2015 435i - 401whp
Scorpion catless dp, VRSF 6.5" HD FMIC, MST V2 inlet, NGK 97506, MHD Stage 2+ 102, xHP Stage 3, M Performance Exhaust (modified for valved straight thru) |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|