F90 coding

jjjjjjjjjjjjj · 10-01-2018, 02:01 PM

Quote:

Originally Posted by MartinS

how is it possible to retrofit remote parking without integral steering?

I think its impossible as it requires to enable in connected drive? or code key lol?

shellbmb · 11-04-2018, 07:30 AM

Does anyone have a list of what exactly can be coded?

r33_RGSport · 11-04-2018, 08:54 AM

Quote:

Originally Posted by shellbmb

Does anyone have a list of what exactly can be coded?

There is no specific list available.

But here are the list that I can code so far.

- Disclaimer delete
- VIM
- Rear Camera Zoom
- Rolls Royce sound
- Startup in Sport mode
- Anti-Dazzle headlight
- Enhanced Bluetooth
- Open and Close trunk with Keyfob or Inside button
- Seatbelt warning
- Door windows interruptions during open and close door

I am still trying to find more.
If you need coding, I can do it remotely too.

Edit: removed the fog light coding since F90 M5 don't have fog lights.

windtendo · 11-05-2018, 08:59 AM

Quote:

Originally Posted by r33_RGSport

There is no specific list available.

But here are the list that I can code so far.

- Disclaimer delete
- VIM
- Rear Camera Zoom
- Rolls Royce sound
- Startup in Sport mode
- Fog light with High Beam
- Fog light with daytime light only
- Anti-Dazzle headlight
- Enhanced Bluetooth
- Open and Close trunk with Keyfob or Inside button
- Seatbelt warning
- Door windows interruptions during open and close door

I am still trying to find more.
If you need coding, I can do it remotely too.

What is VIM and Enhanced Bluetooth?

r33_RGSport · 11-05-2018, 09:06 AM

Quote:

Originally Posted by windtendo

Quote:

Originally Posted by r33_RGSport

There is no specific list available.

But here are the list that I can code so far.

- Disclaimer delete
- VIM
- Rear Camera Zoom
- Rolls Royce sound
- Startup in Sport mode
- Fog light with High Beam
- Fog light with daytime light only
- Anti-Dazzle headlight
- Enhanced Bluetooth
- Open and Close trunk with Keyfob or Inside button
- Seatbelt warning
- Door windows interruptions during open and close door

I am still trying to find more.
If you need coding, I can do it remotely too.

What is VIM and Enhanced Bluetooth?

VIM - Video in Motion
Enhanced Bluetooth - Multiple (2) phones synched and Office features, besides the 2 microphone in the car, extra USB port, and wireless charging.

Not sure if it is standard on all F90 M5 on the later one.

afk8445 · 11-05-2018, 11:23 AM

Thanks for the list and explanations...
I think the trunk open close from inside button came ready with the car, the one I think needs coding is closing trunk via key fob.

can you please explain a little more on "office functions" that you get with enhanced bluetooth?

thanks again for the information

r33_RGSport · 11-05-2018, 01:12 PM

Quote:

Originally Posted by afk8445

Thanks for the list and explanations...
I think the trunk open close from inside button came ready with the car, the one I think needs coding is closing trunk via key fob.

can you please explain a little more on "office functions" that you get with enhanced bluetooth?

thanks again for the information

I believe these are what came with office functions.
- Calendar
- Email
- Note

It could be standard on F90 M5.

///M ARMY · 11-08-2018, 08:31 PM

any update on coding?!?

shellbmb · 11-09-2018, 08:55 AM

Can you code to where all the doors and truck unlock when the car is turned off? Or when I open the driver's door upon getting out? One of my biggest gripes with BMW has always been that it won't unlock the other doors when I get out of the car. So if I have to go back out and get something out of the trunk and I left my keys inside, I have to manually go inside the car and unlock the doors or open the trunk. And it was especially annoying when BMW put the lock/unlock button in the center console. I coded this on my F10 and it worked perfectly. Not sure if the F90 has a setting for this already.

foldpages · 11-09-2018, 09:31 AM

Quote:

Originally Posted by shellbmb

Can you code to where all the doors and truck unlock when the car is turned off? Or when I open the driver's door upon getting out? One of my biggest gripes with BMW has always been that it won't unlock the other doors when I get out of the car. So if I have to go back out and get something out of the trunk and I left my keys inside, I have to manually go inside the car and unlock the doors or open the trunk. And it was especially annoying when BMW put the lock/unlock button in the center console. I coded this on my F10 and it worked perfectly. Not sure if the F90 has a setting for this already.

Is there no setting for this in iDrive? There is one on the F86 X6M to unlock all doors when shutting off the engine.

SocalDude · 11-09-2018, 11:16 AM

I had a 650i coded several years back, but when I took it in for maintenance the dealer update the software which reset all the codes to factory default.

So what's the point of coding (unless you do not want to update the sw of the car)?

josec70 · 11-09-2018, 12:25 PM

Quote:

Originally Posted by shellbmb

Can you code to where all the doors and truck unlock when the car is turned off? Or when I open the driver's door upon getting out? One of my biggest gripes with BMW has always been that it won't unlock the other doors when I get out of the car. So if I have to go back out and get something out of the trunk and I left my keys inside, I have to manually go inside the car and unlock the doors or open the trunk. And it was especially annoying when BMW put the lock/unlock button in the center console. I coded this on my F10 and it worked perfectly. Not sure if the F90 has a setting for this already.

More options via Idrive than the F10 for sure; I know I can unlock all four doors with the FOB via Idrive option. I'll check for you later today.

Lock / Unlock now on door so less of a PITA; I hated that on the F10 M5 as well although I never coded it.

NASTY-M5 · 11-09-2018, 04:32 PM

http://www.codemycar.com/wp-content/...-CodeMyCar.pdf

josec70 · 11-09-2018, 05:58 PM

Quote:

Originally Posted by shellbmb

Can you code to where all the doors and truck unlock when the car is turned off? Or when I open the driver's door upon getting out? One of my biggest gripes with BMW has always been that it won't unlock the other doors when I get out of the car. So if I have to go back out and get something out of the trunk and I left my keys inside, I have to manually go inside the car and unlock the doors or open the trunk. And it was especially annoying when BMW put the lock/unlock button in the center console. I coded this on my F10 and it worked perfectly. Not sure if the F90 has a setting for this already.

Some of the idrive options on the F90 M5.

r33_RGSport · 11-09-2018, 11:03 PM

Quote:

Originally Posted by shellbmb

Can you code to where all the doors and truck unlock when the car is turned off? Or when I open the driver's door upon getting out? One of my biggest gripes with BMW has always been that it won't unlock the other doors when I get out of the car. So if I have to go back out and get something out of the trunk and I left my keys inside, I have to manually go inside the car and unlock the doors or open the trunk. And it was especially annoying when BMW put the lock/unlock button in the center console. I coded this on my F10 and it worked perfectly. Not sure if the F90 has a setting for this already.

Who is the question for?

r33_RGSport · 11-09-2018, 11:26 PM

Quote:

Originally Posted by SocalDude

I had a 650i coded several years back, but when I took it in for maintenance the dealer update the software which reset all the codes to factory default.

So what's the point of coding (unless you do not want to update the sw of the car)?

If you are fine with the way it is stock, that's good.
Majority of BMW owners are don't mind missing some of the features that other car manufacturers have.

But, for some that like to live an exciting life with more convenience, they don't mind coding it again or even learning how to code.

It is like you are paying someone to configure your Wi-Fi router, then there is a firmware upgrade that resetted the router to factory default.
Just because you are fine with factory default setting which the admin's password is "password" and Wi-Fi password as "Zfdjnt#%_528!", what's the point of paying someone or learning how to configure your own Wi-Fi router.

I personally do mind. I am not gonna memorize or even run my home network with router's password as "password". I personalize my own router to my liking.

Almaretto · 11-10-2018, 04:22 AM

I keep the list of what I have found on my profile page.

Less options need to be coded, but still some classics as well as new options.

JOHNBMWM5 · 11-10-2018, 05:17 AM

Quote:

Originally Posted by MartinS

how is it possible to retrofit remote parking without integral steering?

You can't, some think you can code everything, BMW are not that stupid or we would all code everything.

siba32 · 10-29-2019, 04:53 PM

Quote:

Originally Posted by ilushka85

Just wanted to let you know that my f90 was successfully coded tonight. No more seat belt chimes. No more disclaimers. Rolls Royce sounds instead of bmw sounds. Euro headlights. Euro speed signs and much more.

Next on the list is the display key and remote park retrofit.

Were you able to get the display key to remote park retrofit. That option only available on G30 not the F90. Can you pls guide me how you did that. I have the display key but its useless without that option.

Archer7 · 01-09-2020, 08:12 PM

Is there any coding cheat sheet for esys to code the F90? Plus just wanted to ask you guys what do you think about this video?

Is this even possible through Esys?

wrecklesswun · 10-09-2021, 07:25 PM

Willing to pay direct to fix (rather not pay the dealer)

I attempted to read the BDC-M and BDC-W. It backed up fine as well as other modules. After restarting the vehicle, it now only will:

Go in Neutral and Reverse
TPM monitor is error
Trunk is always open, when closed
Transmission fault, however no service needed
no interior lights, buttons work - windows roll down but not up
tried restoring backup, but it fails no matter what i do in the suggestions.

I have the cable with nic interface, i just don't know what software to use.

Please help!!!

I'll be up for a while.

wrecklesswun · 10-10-2021, 04:51 AM

Quote:

Originally Posted by SLF80

Just got my F90.

Could you please clarify the differences between the NFC Digital Key and the Display Key?

I called BMW and they said the Display key doesn't work.

wrecklesswun@msn.com (PM doesn't work for me)

11-04-2018, 07:30 AM	#24
shellbmb Lieutenant 199 Rep 572 Posts Drives: 2022 F90 M5C Join Date: Apr 2013 Location: ATX iTrader: (0)	Does anyone have a list of what exactly can be coded?
	Appreciate 0 Quote

11-05-2018, 11:23 AM	#28
afk8445 Enlisted Member 22 Rep 49 Posts Drives: 2018 M5 Blk sp Metallic Join Date: Sep 2015 Location: Houston, Texas iTrader: (0)	Thanks for the list and explanations... I think the trunk open close from inside button came ready with the car, the one I think needs coding is closing trunk via key fob. can you please explain a little more on "office functions" that you get with enhanced bluetooth? thanks again for the information
	Appreciate 0 Quote

11-08-2018, 08:31 PM	#30
///M ARMY Brigadier General 1003 Rep 3,051 Posts Drives: F90 Join Date: Jul 2012 Location: Cali iTrader: (2)	any update on coding?!? __________________ 2022 RAM TRX 2021 Ford Bronco 2022 BMW M3
	Appreciate 0 Quote

11-09-2018, 08:55 AM	#31
shellbmb Lieutenant 199 Rep 572 Posts Drives: 2022 F90 M5C Join Date: Apr 2013 Location: ATX iTrader: (0)	Can you code to where all the doors and truck unlock when the car is turned off? Or when I open the driver's door upon getting out? One of my biggest gripes with BMW has always been that it won't unlock the other doors when I get out of the car. So if I have to go back out and get something out of the trunk and I left my keys inside, I have to manually go inside the car and unlock the doors or open the trunk. And it was especially annoying when BMW put the lock/unlock button in the center console. I coded this on my F10 and it worked perfectly. Not sure if the F90 has a setting for this already.
	Appreciate 0 Quote

11-09-2018, 11:16 AM	#33
SocalDude Private 73 Rep 87 Posts Drives: BMW M5 Join Date: Feb 2015 Location: Socal iTrader: (0)	I had a 650i coded several years back, but when I took it in for maintenance the dealer update the software which reset all the codes to factory default. So what's the point of coding (unless you do not want to update the sw of the car)?
	Appreciate 0 Quote

11-09-2018, 04:32 PM	#35
NASTY-M5 Second Lieutenant 46 Rep 217 Posts Drives: 2019 M% Competition Join Date: Aug 2018 Location: Halifax, NS, Canada iTrader: (0)	http://www.codemycar.com/wp-content/...-CodeMyCar.pdf __________________ BMW newbie, please be kind and patient 2019 M5 Competition.
	Appreciate 0 Quote

11-10-2018, 04:22 AM	#39
Almaretto Major General 2374 Rep 8,364 Posts Drives: Test Vehicles Join Date: Dec 2015 Location: Mountain View, CA iTrader: (0)	I keep the list of what I have found on my profile page. Less options need to be coded, but still some classics as well as new options.
	Appreciate 1 stealth70mde375.50 Quote

01-09-2020, 08:12 PM	#42
Archer7 New Member 2 Rep 17 Posts Drives: F90 Com Join Date: Feb 2017 Location: Maryland MD iTrader: (0)	Is there any coding cheat sheet for esys to code the F90? Plus just wanted to ask you guys what do you think about this video? Is this even possible through Esys?
	Appreciate 0 Quote

10-09-2021, 07:25 PM	#43
wrecklesswun New Member 5 Rep 28 Posts Drives: BMW M5 Join Date: Sep 2021 Location: Alpharetta, GA iTrader: (0)	Willing to pay direct to fix (rather not pay the dealer) I attempted to read the BDC-M and BDC-W. It backed up fine as well as other modules. After restarting the vehicle, it now only will: Go in Neutral and Reverse TPM monitor is error Trunk is always open, when closed Transmission fault, however no service needed no interior lights, buttons work - windows roll down but not up tried restoring backup, but it fails no matter what i do in the suggestions. I have the cable with nic interface, i just don't know what software to use. Please help!!! I'll be up for a while.
	Appreciate 0 Quote