[NCRob]

Originally Posted by dcohen13

do you like the rear fender liner carbon pieces? Rubbing at all?

No rubbing. Yes, I really like the look myself. Understand many do not, but I certainly do!

[dcohen13]

Rex Racing 102 Evo
20x10 +22
20x10 +17
Xcomp HP 275/35/20 squared
Eibach M5 Pro Kit springs

[Patton250]

Originally Posted by remmib

Have you seen this thread about OEM wheels and spacers? https://f90.bimmerpost.com/forums/sh....php?t=1577139

Your fitment in question is like putting 20mm spacers front, and 11mm rear. Many go with 15f/12r and they’re often lowered. Lowering will tuck the wheel in, especially in the front, so if you’re not lowered, et14 will look quite aggressive.

So I ended up going with the the below wheels and tires. I have no plans as of yet to lower the car. I appreciate your help. Your advice helped me make my final decision. I will have these wheels in the next three weeks. I’ll post pictures of the car with the wheels on this thread when they are mounted. Thanks again for your help.

HRE P101 Satin Black
20X9.5 Front et16 275/35ZR20*
20X10.5 Rear et28 285/35ZR20*

[josec70]

Originally Posted by Patton250

So I ended up going with the the below wheels and tires. I have no plans as of yet to lower the car. I appreciate your help. Your advice helped me make my final decision. I will have these wheels in the next three weeks. I’ll post pictures of the car with the wheels on this thread when they are mounted. Thanks again for your help.

HRE P101 Satin Black
20X9.5 Front et16 275/35ZR20*
20X10.5 Rear et28 285/35ZR20*

You can never go wrong with HRE! Congrats!!

[Patton250]

Originally Posted by josec70

You can never go wrong with HRE! Congrats!!

Thanks man!!

[WheelsBoutique]

F90 M5 Competition on HRE Classic 305 FMR

More photos at - https://wheelsboutique.com/galleries/m5-5-series

[NCRob]

Originally Posted by NCRob

No rubbing. Yes, I really like the look myself. Understand many do not, but I certainly do!

I stand corrected: Shop that is finishing up my KW HAS kit just told me I was getting some wear on the tire from those as is and would likely be worse now lowered so off the go. Its probably best to use those if you are running stock suspension & tires only.

So I'll likely just find something like this that goes on the outside - looks classy, huh?!? Kidding!

[josec70]

Starting 2nd Round of mods:

My decision boiled down to two iconic wheel manufacturers (HRE-BBS) before ultimately selecting BBS.


BBS FI-R - Satin Black / Blk-Gld Centercaps

21 x 10 et22 - 20.1 lbs
21 x 11 et24 - 22.1 lbs

Michelin PS4S

285-30-ZR21
295-30-ZR21

My goal was to balance the the “pop” of the PPF + Ceramic with a more subtle wheel color and I feel I have achieved that with this set. The centercaps tie in the Gold Calipers nicely and round out the look.

Big shoutout to Eric and Kim supremepower who were amazing during the entire process. Best in class customer service and straight-up good people who love cars.

Shoutout to Brandon at Hughes Detailing in Miami.

Full photoshoot to follow soon.

[NCRob]

Originally Posted by NCRob

Signature SV 104 Gloss Black
F: 21x10 et 20, 23 lbs
R: 21x11 et 26, 24 lbs
Tires 285&295/30/21 Michelin PS4s
Stock Comp Height now but lowering on KW shortly

Dropped on KW HAS ( had to delete CF rear liners), G2 caliper paint on rotor hats (SO glad I did that), and Dinan monoballs installed. 196” / 4200lb canyon carver of sorts now.

[NCRob]

Originally Posted by josec70

Starting 2nd Round of mods:

My decision boiled down to two iconic wheel manufacturers (HRE-BBS) before ultimately selecting BBS.


BBS FI-R - Satin Black / Blk-Gld Centercaps

21 x 10 et22 - 20.1 lbs
21 x 11 et24 - 22.1 lbs

Michelin PS4S

285-30-ZR21
295-30-ZR21

My goal was to balance the the “pop” of the PPF + Ceramic with a more subtle wheel color and I feel I have achieved that with this set. The centercaps tie in the Gold Calipers nicely and round out the look.

Big shoutout to Eric and Kim supremepower who were amazing during the entire process. Best in class customer service and straight-up good people who love cars.

Shoutout to Brandon at Hughes Detailing in Miami.

Full photoshoot to follow soon.

Great choice and goal achieved!

[ResIpsaLoquitur]

Originally Posted by NCRob

Dropped on KW HAS ( had to delete CF rear liners), G2 caliper paint on rotor hats (SO glad I did that), and Dinan monoballs installed. 196” / 4200lb canyon carver of sorts now.

Your car just gets better and better!

[Alessandro Silva]

Originally Posted by M5VanHalen

2023 M5 with 21" BBS Fi-R in Satin Black. Also, H&R lowering springs. I think the stance is perfect and rides like stock. Thanks to Supreme Power for the recommendation.

Most beatiful M5 configuration so far in my opinion. Can you share wheels specs? Offset? Both diameter?
Another thing, is possible to use 295/35 in the rear and 285/35 in the front as you riding 21"s?

Thanks man.

[DryBark]

Originally Posted by Alessandro Silva

Most beatiful M5 configuration so far in my opinion. Can you share wheels specs? Offset? Both diameter?
Another thing, is possible to use 295/35 in the rear and 285/35 in the front as you riding 21"s?

Thanks man.

I think running 35s on 21” rims would be too big a difference, but maybe it would mostly just impact the handling and speedo. It would be a +4.3% difference on the rear and 4.7% on the front. Not sure how that impacts the transfer case.

https://tiresize.com/calculator/

[ResIpsaLoquitur]

Originally Posted by NCRob

Dropped on KW HAS ( had to delete CF rear liners), G2 caliper paint on rotor hats (SO glad I did that), and Dinan monoballs installed. 196” / 4200lb canyon carver of sorts now.

How are your painted rotor hats holding up, Rob? Any issues to report?

[ResIpsaLoquitur]

Originally Posted by Alessandro Silva

Most beatiful M5 configuration so far in my opinion. Can you share wheels specs? Offset? Both diameter?
Another thing, is possible to use 295/35 in the rear and 285/35 in the front as you riding 21"s?

Thanks man.

Originally Posted by DryBark

I think running 35s on 21” rims would be too big a difference, but maybe it would mostly just impact the handling and speedo. It would be a +4.3% difference on the rear and 4.7% on the front. Not sure how that impacts the transfer case.

https://tiresize.com/calculator/

This is a good question for pbonsalb, as he’s very knowledgeable about this. I can’t remember the exact number, but I think I recall him mentioning that the high 1%s (like 1.5 to 1.9?) are the most one should deviate.

[Alessandro Silva]

Originally Posted by DryBark

I think running 35s on 21” rims would be too big a difference, but maybe it would mostly just impact the handling and speedo. It would be a +4.3% difference on the rear and 4.7% on the front. Not sure how that impacts the transfer case.

https://tiresize.com/calculator/

That´s the problem, I read that we need to stay under 1.1% to avoid transfer case issues. As I live in Brazil and our streets are very like moon tarmac it´s complicated to use low tire profile.

[DryBark]

Originally Posted by Alessandro Silva

That´s the problem, I read that we need to stay under 1.1% to avoid transfer case issues. As I live in Brazil and our streets are very like moon tarmac it´s complicated to use low tire profile.

In Canada as well. I’m still going with 21” and 30s. Hopefully it will be okay.

[dcohen13]

New brand coming our way. Will dive into details soon! Website is almost finished. Yes, there will be massive discounts for F90 Bimmerpost members.

[VFJon]

21x10
21x11
IG:@viname_f90

[olis1]

Originally Posted by VFJon

21x10
21x11
IG:@viname_f90

Attachment 3275583
Attachment 3275584
Attachment 3275585

Looks Great!

[m5_lee]

New to the forums. This is my second M5. But omg I had to share these wheels!

Follow me on Instagram! m5_lee

Wheels:
Vision Forged - 2 Piece Wheels
Model: VF008-2
21X10 ET: 22 PCD: 5X112
21X11 | ET: 24 | PCD: 5X112
Face Color: Brushed Black
Lip Color: Polished

[WheelsBoutique]

Just a small handful of the F90 M5's we've done for our clients. In order: HRE S101SC, HRE 527 FMR, HRE Classic 300, ANRKY AN38.