03-02-2024, 03:10 PM | #1 |
New Member
23
Rep 26
Posts |
New Vessel HF-5 21" - Rubbing front vents - 2022 M5 Comp
Hi all,
I just mounted up my new Vossen HF-5 gloss black wheels, wrapped in Michelin Pilot PS4 tires. Fitment is mostly ok, except the front. When turning the front wheels, they rub on the front brake vents. I believe the offset is 20 in front and 25 in back. The back wheels are perfectly fine. Any suggestions to stop the rubbing? Also, the car is bone stock, no lowering has been done. |
03-02-2024, 04:32 PM | #2 |
Second Lieutenant
167
Rep 223
Posts |
My set of 21s have 275 30 PS4S in the front. ET22. Thats a 5mm difference in diameter, 704 vs 699.
Edit you're rubbing directly in line with the hub so it's not a suspension issue, this is strictly down to the radius being too long from the hub. Last edited by S EyeLand; 03-02-2024 at 04:40 PM.. |
Appreciate
0
|
03-02-2024, 04:57 PM | #4 |
New Member
23
Rep 26
Posts |
Ahh, so you think dropping to 275 will solve the issue from the 285? I went with 285 as it looked like that’s what most were running with 10” wheels up front.
|
Appreciate
0
|
03-02-2024, 05:35 PM | #5 |
Second Lieutenant
167
Rep 223
Posts |
I know people run 285 on 20s which would be .5" more radial clearance vs 21s but I'm sure with the right tire, one with round corners, you could run that on 21s as well but unless your car was in an accident or has damage that would cause that inner lining to shift, I'm thinking 285 30 21 PS4S are too wide and square to clear but I'm not an expert. If you were in the area i would test fit my 21s on your car... maybe someone in your area can help you with that.
|
Appreciate
0
|
03-02-2024, 08:25 PM | #6 |
Major General
4092
Rep 5,237
Posts |
I’m on 21” BBS FI-R as follows with no rubbing issues:
21 X 10 et 22 21 X 11 et 24 Tires: Michelin PS4S 285-30-ZR21 295-30-ZR21 I’m also lowered on KW V4’s.
__________________
CURRENT: 22' INDIVIDUAL M5| CHALK | TARTUFO | CCB | MPE | H&R | IND
GONE: 19' M5C| SINGAPORE GREY| ARAGON|VELOS VLS-06|H&R|iPE|IND|XPEL|CF|RADENSO GONE: 15' F10 M5|BSM|BLACK|VELOS VSS-S2|KW|AKRA|IND|CF |ESCORT 360|VELOS PIGGY GONE: 13' F10 M5|SG|BLACK|AKRA|KW|IND LONG GONE: 09' E60 M5|02' E39 M5 |
Appreciate
0
|
03-02-2024, 08:32 PM | #7 |
New Member
23
Rep 26
Posts |
|
Appreciate
0
|
03-02-2024, 08:34 PM | #8 |
Major General
4092
Rep 5,237
Posts |
Agreed.
Can you double check the front offsets? Is it on both fronts or just one?
__________________
CURRENT: 22' INDIVIDUAL M5| CHALK | TARTUFO | CCB | MPE | H&R | IND
GONE: 19' M5C| SINGAPORE GREY| ARAGON|VELOS VLS-06|H&R|iPE|IND|XPEL|CF|RADENSO GONE: 15' F10 M5|BSM|BLACK|VELOS VSS-S2|KW|AKRA|IND|CF |ESCORT 360|VELOS PIGGY GONE: 13' F10 M5|SG|BLACK|AKRA|KW|IND LONG GONE: 09' E60 M5|02' E39 M5 |
Appreciate
0
|
03-02-2024, 08:48 PM | #10 |
Second Lieutenant
167
Rep 223
Posts |
Measure the back of the tire, at the 3 o'clock, to the fender on the driver's side and the 9 o'clock to the fender on the passenger's side and compare. Its very possible your caster needs adjustment, when was your last alignment.
|
Appreciate
0
|
03-02-2024, 08:53 PM | #12 | |
Second Lieutenant
167
Rep 223
Posts |
Quote:
|
|
Appreciate
0
|
03-02-2024, 10:07 PM | #13 |
Major General
4092
Rep 5,237
Posts |
Check inner lining to ensure that is not the issue and if OK, I would do an alignment.
__________________
CURRENT: 22' INDIVIDUAL M5| CHALK | TARTUFO | CCB | MPE | H&R | IND
GONE: 19' M5C| SINGAPORE GREY| ARAGON|VELOS VLS-06|H&R|iPE|IND|XPEL|CF|RADENSO GONE: 15' F10 M5|BSM|BLACK|VELOS VSS-S2|KW|AKRA|IND|CF |ESCORT 360|VELOS PIGGY GONE: 13' F10 M5|SG|BLACK|AKRA|KW|IND LONG GONE: 09' E60 M5|02' E39 M5 |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|