We took some accurate measurements based on a full tank of gas, and about 50lbs of weight in the trunk that I always have in the car.
Front needs to be dropped 1.5" so that the top of the wheel edges to the fender flares are the same front and rear. This is the result. Did not want to touch the rear ride height because it is already very low. We confirmed this at the end by remeasuring the heights.
Drop in front: 1.5"
Drop in rear: 0.0"
Note: 20mm/18mm spacers front/rear. No rubbing.
Last edited by BigMacSmallFries; 10-05-2014 at 05:55 PM..
|