Quote:
Originally Posted by cookiesowns
I responded to your PM. also I took a better look at your carly report.
I have a feeling of these things.
1) DME has a incomplete flash on it causing wonky issues, it also seems like coding file might be incomplete
2) Your DME was fried when it was bench flashed by ENZO.
1) is fixable via ISTA-D and E-SYS. I can totally do this for you if you have a ENET cable.
2) bigger issue, and its not as simple as just getting a new DME. If you have the stock readout it might help.
|
I dont think its a flash issue as the car was running fine even with the 2 02 codes for probably 5k miles ive had bootmod3 and 11k miles since enzo "tuned it" however ever since enzo touched my car its had DT malfuction issues...usually as the engine/turbo heated up....bootm0d3 helped but still sporatic misfires at high rpms/ higher gears...and limp mode...
I have the 4mb readout but enzo apparently gave me THE 4MB READOUT that was post his crap tune...because its showing dme tamper code even with bootmod3.