Quote:
Originally Posted by Maverik259
Quote:
Originally Posted by Joe-BMW33
Quote:
Originally Posted by euro*
For euro lights. You either have to run 2 new wires from the 2 inner tail lights all the way to the front of the car to the BDC module.
Or the easier way is to run the wire from the inner tail lights, to the outer lights. Make a new wire from PIN#5 of inner lights and run it to PIN#2 of outer light, same for both sides.
|
Thank you. Since posting this question my shop informed me of the first choice, running from BDC (which increased he cost of the install). I will run option #2 by them.
So, from what I have gathered over the last few days is that the Euro lights will work perfectly on a US car including the welcome lights, but the blinker is a small amber strip on the bottom of the inner lights which may not be DOT compliant. Does this all sound accurate? |
I haven't seen anyone say that euro lights don't have the welcome lights issues. But I could be wrong. The two threads are very confusing and most people discussing this issue don't really seem to know what they're talking about. My guess is they just paid someone oe their dealer to install and have no idea what works and what doesn't.
But I think they all have that issue and Several people doing the mod I believe got the euro version from eBay Germany if I recall.
Simply, I don't recall a single person in the US say they got welcome lights working regardless of what version they installed. Which makes me think it's a US software build issue and not a hardware one. |
Not correct. I know of guys in USA who have euro
lights and they don't have welcome light issues.
One guy actually got both sets. First he installed USA lights, had welcome light issues, and then switched to Euro lights, no welcome light issues.