Quote:
Originally Posted by Used2be
I assume that's 305/30 and 295/30? Are you running Michelin SC2 also? No rubbing on the plastic at full lock in front? I'm lowered slightly, is your car also? Oh, just remembered I'm on a 10" wide front rim, but that probably doesn't make any difference. What's your front rim width?
|
Quote:
Originally Posted by Jonathan G.
Are these 295/35-20 in front and 305/35-20 in rear?
With what wheels and what are their offsets ?
Are you at stock ride height or lowered ?
No rubbing at all in the front turning from lock to lock?
Thanks!
|
Lowered on Eibach Springs
Michelin PS4
295/35/20
305/35/20
Wheels are the Titan7
20x11 +22
20x12 +30
Front pushes out 16mm vs stock
Rear pushes out 8mm vs stock
The only time I sense a rub is backing out of my garage and doing a full lock adjustment before pulling back forward (sort of a three point turn out of the M5 spot). It is extremely minor and I do not notice it pulling into the garage.
If you remember the old cars when the PS pump would whine at full lock and if you just let 1 ftlb of pressure off the lock then it would be quiet. Same, just don't try to muscle the wheel at lock and it won't rub.