Quote:
Originally Posted by apsuard
Quote:
Originally Posted by remmib
Yes, correct. 11mm front and 5mm rear.
Have you seen this thread about spacers with the OEM wheels?
https://f90.bimmerpost.com/forums/sh....php?t=1577139
Some do up to 15mm front and 12mm rear.
15mm front spacers is like ET19 with 10" wide front wheels, and 12mm rear spacers is like ET22 with 11" wide rear wheels.
So the BBS ET22 and ET24 fitment is like having 12mm spacers front and 10mm rear on the OEM wheels. |
Agree. My recommendation on offsets would be 18 front and 24 rear or 16 front and 22 rear. Depending on how aggressive you go. |
Can you see my last post below in response and see what you think knowing the springs I'll have?
"This is super helpful. So if I'm doing the H&R m550 springs and the drop is 1.2 or 1.3 what do you think I should do? I don't want the wheels to rub or have negative camber, I just want the perfectly flush look where the wheels line up even with the top of the wheel well, but also don't stick out too far."