HeckYeahBro,
Check to see if the top plate of your KMAC has three extra holes on a smaller diameter circle than the outer perimeter holes that mount to the strut tower itself. These extra holes would be needed to screw the big odd shaped aluminum support bracket into. This bracket is obvious when you take the plastic covering off this area.
I'm guessing you don't have these extra holes. I've been talking to KMAC directly in Australia and they seemed not to know of the need for these support bracket mounting points. I think they just assumed that their F30 camber plates would work, but the F30 doesn't have the extra aluminum support bracket.
Terry
|