[apexxx6789]

Shocks / struts were blown out, decided to replace them with Bilstein B6s. Front end raised from 26.5 to 27, back end was at a 2 finger wheel gap, I know a very accurate description, and stayed there.

Did not like the front raised so much so replaced springs with Dinan -.5 front and 0/ no change in the back. Front settled at about 26.75 but the back end settled about .25 inch at first and now is probably down .5 inch lower. How do I raise the back end up a bit?

I know Dinan recommends Koni shocks.
I did not use the Dinan handling kit.

Bilsteins felt great alone, springs made it so much better but more aggressive/rougher, probably have 250 miles so far and still need an alignment.

Thanks