Guys, I just wanted to give a shout-out to
shawnsheridan. He's the most helpful member on this forum. Without his help, I wouldn't even know where to start.
Messaging with Shawn back and forth, I finally loaded the software to another laptop (work laptop had firewall, so it wouldn't connect). I went code crazy all morning. Coded the following:
- Euro MDM
- Rear Fog Light - thanks to
tom @ eas
- Remove legal warning on nav screen
- Remove seatbelt warning
- DVDinMotion
- A/C memory
- Unlock doors at engine shut-off
- Brake Force Flashing
Refer to the VO coding document for the anti-dazzle or Euro LED headlight. U.S. DOT didn't approve BMW's anti-dazzle technology so you must change the vehicle order (VO). Follow each step carefully.
Cable Link: http://www.ebay.com/itm/OBD2-ENET-Et...135320&vxp=mtr
If you guys have any questions on how to get started, let me know. If you need the links to the software files, ping Shawn.
Shawn doesn't want any money for helping us out. If you're feeling generous, please donate to his buddy who's been providing the Coding Application data and hosting all the coding software/data. Paypal email below.
warpeddriveservices@gmail.com
I gotten hundreds of dollars worth of features for my car. I hooked his buddy up with a small donation for the support to the BMW community. Pay it Forward.
Once your software is installed, you'll just need these 2 documents attached. If you follow these 3 simple rules, you will not do any damage to your car:
- Never click on the "Code Default Values" button
- Backup (Read and Save) FA, SVT, and CAFD files before you start
- Only code the CAFD files (green circle)
Euro MDM parameter under DSC Module:
C_Laenderkennung => ECE
CTpmsMarket => EU
CPrewarnEnable => enable
CPrewarnIgnition => enable
CalLrPDevMax => 50kpa
CPInitRangeMax => 80kpa
UiaSetLevelPc => 20%
UiwSetLevelPc => 15%
More info here: http://x3.xbimmers.com/forums/showthread.php?t=715297