Quote:
Originally Posted by nicsteez
Hey guys, I have an automatic 07 335i. I replaced the oil pan gasket and when installing, snapped one of the short bolts on the oil pan. My dumbass didn't use a torque wrench when installing and went a little too far. Will I be fine with just one snapped bolt?
|
You need to invest into
1) excellent, small torque wrench
Garage Ready Digital Torque Wrench - (4 to 22 ft-lbs) (48-264 in-lbs) (5 to 30 Nm) +/- 2% Accuracy with Limit Buzzer & LED Flash Notification and Peak Trace Tracking (1/4-Inch Drive)
https://www.amazon.com/dp/B07D6ZSKQ5..._xqTBDbCH0EDCK
2) nice set of cobalt bits
Bosch CO14B 14 Pc. Cobalt M42 Drill Bit Set
https://www.amazon.com/dp/B07Q9HNTBH..._CnTBDbS9GDRXY
3) quality spline kit
Irwin Tools Hanson 53227 Hex Head Multi-Spline Screw Extractor Set, 25 Piece
https://www.amazon.com/dp/B0002SRG66..._NlTBDbY0MW7Q1