|
Guys, these wheels fit with plenty of clearance with a 5mm spacer. I have about 4mm clearance to the brake caliper. I am debating if I should run the Macht Schnell 5mm spacers front and 10mm rear, 5mm square, or 5mm front and nothing rear. I think square or 10mm rear would be a better look. The 270Ms sit 5.4mm further inside than the 10x19 437M in the rear, so adding 5mm would make it look close to stock, 10mm would push the wheels out just under 5mm.
Should I have any concerns about running the 5mm spacer? They don't provide their own lip so you're left with 5mm less off the lip on the hub. As I understand it this is only there to aid in mounting the wheel.
|