Quote:
Originally Posted by dreamingat30fps
Thanks! Learned pocket screws from YouTube! I thought the wood would be expensive, but it’s only super pricey for the fancy stuff I’m guessing you’re actually suppose to make furniture from. I used the cheapest 2x4s and 2x6s for the top. I believe it was like $4ish for each of the 9 2x4x8 and maybe $7ish for each of the 3 2x6x8. I’m probably over $60 if you add in the screws and stain and I had to buy the pocket screw gizmo.
All that being said I fucked up! Got TV in today and the feet are like a fucking INCH too deep and hang off the top! I also didn’t take into account the wheels added height so the TV is fairly high up now, not horrible but could be a few inches lower. Lastly I didn’t even think about my center channel speaker. In FL I have the TV mounted on the wall so the speaker just sat on the console and was below the tv. In this case 1 there was no room for it and 2 even if there was would block a good chunk of screen. 
So I have begun work on version 2.0. I will use this one for the “concession” stand area and I’m making a deeper, shorter version and will have to come up with some kind of shelf or something in the front for the center channel.  |
You can go to Amazon and look for something like this (maybe you need something bigger for bigger TV).
https://www.amazon.com/dp/B077MJZ6ZG...ing=UTF8&psc=1
I have one in Asheville to fit TV on tabletop and make room for center speaker.
Edit: Found a mediocre / not great pic.