BMW M3 and BMW M4 Forum - View Single Post

Flying Low · 03-25-2015, 11:48 AM

Does anyone know the proper torque values for mounting the front and rear calipers on the M4? I know the front bolts are 12X1.5 10.9. I haven't looked at the rear bolts yet. These bolts screw directly into the aluminum caliper itself so I really don't want to over torque the bolts.

I'm removing the calipers in a last ditch effort to get rid of the transfer material caused by my failed attempt to bed in the Pagid RSL ceramic pads. After driving around for several hundred miles with the OEM pads, I still get judder with the OEM pads but certainly not as bad as when the RSL's were on.
Thanks,
Terry

03-25-2015, 11:48 AM	#1
Flying Low Private First Class 87 Rep 120 Posts Drives: 2002 M3, 2003 M3, 2015 M4 Join Date: Jan 2015 Location: Santa Rosa, CA and St George, UT iTrader: (1)	Caliper mounting torque Does anyone know the proper torque values for mounting the front and rear calipers on the M4? I know the front bolts are 12X1.5 10.9. I haven't looked at the rear bolts yet. These bolts screw directly into the aluminum caliper itself so I really don't want to over torque the bolts. I'm removing the calipers in a last ditch effort to get rid of the transfer material caused by my failed attempt to bed in the Pagid RSL ceramic pads. After driving around for several hundred miles with the OEM pads, I still get judder with the OEM pads but certainly not as bad as when the RSL's were on. Thanks, Terry __________________
	Appreciate 0 Tweet Quote