Quote:
Originally Posted by Mark6147
All
Just had to replace a front tyre for a puncture, very annoying when loads of tread left!
BMW have reset the tyre pressure monitoring system for the 20" inch tyres and it is recommending 2.8 / 2.9 bar for the front / rear.
This compares to the plate on the drivers door which suggests 2.4 / 2.5 for the front / rear? I usually follow the plate as with all cars.
What do other people do? Appreciate any assistance.
Thanks
Mark
|
It should 2.4/2.5 and you will need a software update as the idrive was set incorrectly from the factory and is a common problem. You may find if you put the correct pressures in the car the idrive will tell you the pressures are too low and keep bringing a warning up.