Quote:
Originally Posted by SaNGRia
Hello I believe 2005 has K-Line you need to convert to D-Can first then you can use JBE3 i believe!
|
Yes, that is what I thought.
I had found this info in the BMW info steps of how to retrofit an automatic double clutch transmission:
Part4 ( Replacing JBE ECU ) ( if you have 2007/09 > skip this part )
You can find JBE ECU under the feet of the passenger seat.
First you should replace it on new one JBE2 or JBE3 ECU (61359286790 ).
After this you should integrate D-can bus line for new ECU. ( Old cars have K-line and new ECU will not work )
Change pin on OBD2 socket 7 to 14
and put the additional wire between OBD2 socket pin 6 and JBE ( blue connector ) pin 17
Do you think that will be all to make the change to the D-Can line?