Quote:
Originally Posted by RS61
So I got it to -1.5 all round, and now the outside of the tyre holds up much better during track days which is the main reason I did it. It's a bit more pointy so in normal driving needs a bit more attention, but nothing major so I just have this whole setup on the whole time.
Part numbers for the arms are B31.10.8.053.331 and 332
It's quite hard to tell if the Dinan ball joints were worth it actually. Because I did a bunch of changes together it's impossible to tell if they've made the steering better or worse. In hindsight I wouldn't have done it, and would have only done the drop and the arms and then reviewed.
I did consider the Dinan rear suspension link kit too originally but the feedback from my suspension guys was that it wasn't particularly impactful on this platform.
|
So unless I got lucky, the control arms that come on the LCI Competition are the MINUS. My car getting ready for this track season and I decided to make this mod and ordered the MINUS. Turns out the MINUS is already on the car.